SCS4024 TDK Corporation, SCS4024 Datasheet - Page 2
![PWR SUP AC-DC 24.0V 1.6A](/photos/8/81/88140/scs4024_sml.jpg)
SCS4024
Manufacturer Part Number
SCS4024
Description
PWR SUP AC-DC 24.0V 1.6A
Manufacturer
TDK Corporation
Series
SC40r
Specifications of SCS4024
Power Supply Type
Switching (Open Frame)
Voltage - Output
24V
Number Of Outputs
1
Power (watts)
40W
Applications
Commercial
Voltage - Input
85 ~ 265VAC
Mounting Type
Chassis Mount
1st Output
24 VDC @ 1.6A
Size / Dimension
5" L x 3" W x 1" H (127mm x 76.2mm x 25.4mm)
Power (watts) - Rated
40W
Operating Temperature
0°C ~ 70°C
Efficiency
70%
Approvals
CE, CSA, EN, IEC, UL
Line Regulation
±2%
Load Regulation
±2%
Power Supply Output Type
Fixed
No. Of Outputs
1
Output Voltage
24V
Output Current
1.6A
Power Rating
40W
Input Voltage
85V AC To 265V AC
Length
127mm
Width
76.2mm
Brand/series
SC Series
Dimensions
5.00 in. L x 3.00 in. W x 0.12 in. T
Output
24 VDC @ 1.6 A
Power, Output
40 W
Primary Type
AC-DC
Standards
UL 60950-1, CSA 60950-1, IEC⁄EN60950-1, CE Mark Approval
Temperature, Operating, Maximum
+70 °C
Temperature, Operating, Minimum
0 °C
Voltage, Input
85 to 265 VAC
Voltage, Output
24 VDC
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
3rd Output
-
2nd Output
-
4th Output
-
Lead Free Status / Rohs Status
RoHS Compliant part
Other names
285-1581
4. Safety Approvals
5. Environmental Parameters
6. C.E. Marking
Designed to comply with EN60950-A4, CSA C22.2 No.234-M90, CSA-C22.2 No.950-95 and UL1950-95 when correctly installed in a
limited access environment.
The SC Series of products is designed for the following parameters: Material group llla, Pollution Degree 2, Installation Category 2,
class 1, indoor use (as part of any other equipment such that the SC Series product is accessible to service engineers only).
Humidity: 5 to 95% RH non-condensing, Operational Temperature 0 to 50
STORAGE/TEMPERATURE: Temperature –40
Approval Limitations - Use in North America
When this product is used on 180-250VAC mains with no neutral, connect the two live wires to L (live) and N (neutral) terminals on the
input connector. In this instance double pole fusing is required.
Level of Insulation
Dielectric Strength testing is carried out as follows: Primary AC circuit to earth – 2.4kVDC; **Primary mains circuits to secondary
>4.3kVDC. (**This test is not possible as a finished product as damage to “Y” capacitors will occur.)
CE marking when applied to a product covered by this handbook indicates compliance with the Low Voltage Directive (73/23/EEC) as
modified by the CE Marking Directive (93/68/EEC) in that it complies with EN60950.
0
C to +85
SCS4x and SCS6x
0
C. Humidity: 5% to 95% RH non-condensing.
0
C.