KRD10F-1515 Volgen America/Kaga Electronics USA, KRD10F-1515 Datasheet - Page 4

POWER SUPPLY DUAL 15V 10W

KRD10F-1515

Manufacturer Part Number
KRD10F-1515
Description
POWER SUPPLY DUAL 15V 10W
Manufacturer
Volgen America/Kaga Electronics USA
Series
KRS10Fr
Datasheet

Specifications of KRD10F-1515

Voltage - Output
±15V
Number Of Outputs
2
Power (watts)
10W
Applications
Commercial
Power Supply Type
Switching (Open Frame)
Voltage - Input
85 ~ 264VAC
Mounting Type
Chassis Mount
1st Output
15 VDC @ 350mA
2nd Output
-15 VDC @ 350mA
Size / Dimension
2.56" L x 1.26" W x 0.65" H (65mm x 32mm x 16.5mm)
Power (watts) - Rated
10W
Operating Temperature
0°C ~ 70°C
Approvals
CE, CSA, cUL, EN, IEC, UL
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
3rd Output
-
4th Output
-
Other names
62-1094
Explanation of model name
Explanation of model name
Explanation of model name
Explanation of model name
Amends
Amends
Amends
Amends
Soldering condition
Soldering condition
Soldering condition
Soldering condition
Others
Others
Others
Others
Directions
Directions
Directions
Directions
After it delivers it, I will repair three years free of charge for an emergency breakdown.
However, because handling is careless, it becomes for a fee.
Dip: 240℃-255℃ (within five seconds)
Hand solder: 350℃±10℃ (within three seconds)
This series is designed in our standard power supply for the general electronic
equipment building in. Please do not use it for the equipment (medical equipment,
aircraft, and nuclear power control system, etc.) by which the malfunction and
the breakdown of the power supply threaten the human body and the life directly.
☆ The short-circuit leaving for a long time doesn't cause the breakdown and do not
do, please.
☆ Please note that there is a case to cause a defective start when a mass capacitor
(about 10,000μF) is connected with the load edge.
☆ The input fuse prevents secondary destruction due to the breakdown of the power
supply, and it doesn't operate normally in the exchange only of the fuse.
Please request the repair to the agency or our company when the input fuse fuses.
☆ Please arrange it to separate the pattern from this power supply so that the voltage
of the noise terminal might become large if it arranges it so that the pattern of the AC
input line may pass under this power-supply unit. Moreover, please arrange it to separate
the pattern from this power supply so that the output noise might become large if it
arranges it so that the pattern ofthe DC output may pass under this power-supply unit.

Related parts for KRD10F-1515