NLP65-7615 Emerson Network Power, NLP65-7615 Datasheet - Page 3

• Manufacturer Part Number: NLP65-7615
• Description: PS SWITCHER 15V 65W
• Manufacturer: Emerson Network Power
• Series: NLP65r

Specifications of NLP65-7615

• Rohs Status: RoHS non-compliant
• Voltage - Output: 15V
• Number Of Outputs: 1
• Power (watts): 65W
• Applications: Commercial
• Power Supply Type: Switching (Open Frame)
• Voltage - Input: 85 ~ 264VAC
• Mounting Type: Chassis Mount
• 1st Output: 15 VDC @ 4.4A
• Size / Dimension: 5" L x 3" W x 1.26" H (127mm x 76.2mm x 32mm)
• Power (watts) - Rated: 65W
• Operating Temperature: 0°C ~ 70°C
• Efficiency: 72%
• Approvals: CSA, UL, VDE
• Line Regulation: ±2%
• Load Regulation: ±2%
• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 15V
• Output Current: 4.4A
• Power Rating: 75W
• Input Voltage: 85V AC To 264V AC / 120V DC To 370V DC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Notes
1
2
3
4
5
6
7
8
9
10 Maximum continuous output power for all multiple output models must not
Model Numbering Options
1
2
3
+5 V (IA)
+12 V (IB)
–12 V
+5 V (IA)
+15 V (IB)
–15 V
+5 V
+24 V
+12 V
+5 V (IA)
+24 V (IB)
+5 V (IA)
+12 V (IB)
+5 V
+12 V
+15 V
+24 V
Natural convection cooling. Models NLP65-X629J, NLP65-X608J, NLP65-X610J
must not exceed 62.5 Watts continuous output power with natural convection.
Model NLP65-X620J not to exceed 65 Watts continuous output power with
natural convection. Model NLP65-3322J must not exceed 60 Watts continuous
output power with natural convection.
When the input voltage is less than 90 Vac the operating temperature range is
0
Peak output current lasting less than 60 seconds with duty cycle less than 5%.
During peak loading, output voltage may exceed total regulation limits.
Figure is peak-to-peak for convection power rating. Output noise
measurements are made across a 20 MHz bandwidth using a 6 inch twisted
pair, terminated with a 10 μF electrolytic capacitor and a 0.1 μF ceramic
capacitor.
Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G rms 5
Hz to 500 Hz.
A minimum load on the main output is required for proper start up. For
multiple outputs and single +5V output, the minimum load on the +5 V is 0.2
A. For single outputs greater than +5 V the minimum load is 0.1 A. To
maintain stated regulation then:
for single output units
I ≥ 0.2 A
for multiple output units
0.25
For optimum reliability, no part of the heatsink should exceed 120
semiconductor case temperature should exceed 130
CAUTION: Allow a minimum of 1 second after disconnecting line power when
making thermal measurements.
This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
exceed 75 Watts (70 watts for NLP65-3322J)with 20 CFM forced air cooling.
The enclosure version includes: IEC connector, on/off switch, wire harness
output connector and fitted cover. To order, please add the suffix ‘E’ the model
number, e.g. NLP65-9608EJ. See NLP65 enclosure for details.
A Safety earth ground pin and ground choke are available as an option.
To order, please add the suffix ‘G’ the model number, e.g. NLP65-X608GJ.
To order an enclosure kit (unfitted), order the part number LPX80.
Voltage
Output
°
C to +40
≤ I(A)/I(B) ≤ 5, for I(A) ≥ 0.2 A.
°
C. The ripple and regulation specifications may not be met.
Max (1)
7.5 A
2.5 A
0.65 A
7.5 A
2.2 A
0.65 A
7.0 A
1.5 A
0.7 A
7 A
2 A
7 A
2.5 A
10 A
5.4 A
4.4 A
2.7 A
Output Current
Peak (3)
9.1 A
3.3 A
0.81 A
9.1 A
2.9 A
0.85 A
9.1 A
2.6 A
1.0 A
9.1 A
2.6 A
9.1 A
3.3 A
13 A
7 A
5.7 A
3.5 A
Fan (10)
8 A
3 A
0.8 A
8 A
2.5 A
0.8 A
8.0 A
2.0 A
1.0 A
8 A
2 A
8 A
3 A
12 A
6.5 A
5.3 A
3.5 A
o
C.
o
Ripple (4)
C, and no
50 mV
150 mV
120 mV
50 mV
150 mV
150 mV
50 mV
240 mV
120 mV
50 mV
240 mV
50 mV
150 mV
50 mV
120 mV
150 mV
240 mV
Regulation (6)
11 Conducted and radiated emissions testing were performed using the standard
12 The NLP65 units with the suffix ‘G’ is the ground pin and ground choke option.
13 All models require a minimum mounting stand-off of 0.25 inches (6.35 mm) in
14 The NLP65-9608J is available with an enclosure. To order an enclosed version,
15 No PFC version, EN61000-3-2 is not applicable to this model.
16 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE
17 NOTICE: Some models do not support all options. Please contact your local
±2.0%
±5.0%
±5.0%
±2.0%
±5.0%
±5.0%
±2.0%
±5.0%
±5.0%
±2.0%
±5.0%
±2.0%
±5.0%
±2.0%
±2.0%
±2.0%
±2.0%
Total
EN55022 set-up with a stand alone NLP65 unit placed on a grounded metal
plate with a line choke on the AC input and ground wires (i.e. the wires are
looped through an EMI suppression toroid).
For system compliance it is usually necessary to install an ‘off-the-shelf’ AC inlet
with an integral line filter in the system chassis or to install a line choke on the
input wires as close as possible to AC entry point of the system chasssis. Please
contact the applications group at Artesyn for assistance with EMI compliance.
J2, L6 and JP10 are included. J2 is a safety agency approved grounding pin, L6 is
a ground choke and JP10 is a jumper. This option is intended for use in non-
metallic chassis applications where grounding is not possible via the mounting
screws. The ground choke is provided to assist system EMC compliance. When
performing conducted emissions testing on stand alone units, the ‘G’ option is
required to meet level B. To order simply add the suffix ‘G’ to the standard
model number, e.g. NLP65-7608GJ, NLP65-9608GJ. This option is available for
both the PFC and non-PFC versions.
the end use product.
see model numbering options below.
RoHS 5/6 (non Pb-free) compliant versions may be available on special request,
please contact your local sales representative for details.
Emerson Network Power representative or use the on-line model number
search tool at http://www.powerversion.com.
Non-harmonic
NLP65-7608J
NLP65-7610J
NLP65-3322J
NLP65-7620J
NLP65-7629J
NLP65-7605J
NLP65-7612J
NLP65-7615J
NLP65-7624J
Corrected
NLP65-9608J
NLP65-9610J
NLP65-9620J
NLP65-9629J
NLP65-9605J
NLP65-9612J
NLP65-9615J
NLP65-9624J
Harmonic
Corrected
Embedded Power for
Business-Critical Continuity
Pin (12, 14, 17)
NLP65-X608GJ
NLP65-X610GJ
NLP65-X620GJ
NLP65-X629GJ
NLP65-X605GJ
NLP65-X612GJ
NLP65-X615GJ
NLP65-X624GJ
Ground
NLP65 Series
Rev.06.02.08
3 of 4