USB-ICP-SAB9 Future Designs Inc, USB-ICP-SAB9 Datasheet - Page 4

• Manufacturer Part Number: USB-ICP-SAB9
• Description: SOCKET ADAPTER BOARD
• Manufacturer: Future Designs Inc

Specifications of USB-ICP-SAB9

• Accessory Type: Socket Adapter
• For Use With/related Products: USB-ICP-LPC9xx (622-1002)
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 622-1006

For frequently asked questions regarding the USB-ICP please visit:
Flash Magic is the PC GUI interface software used with the USB-ICP programmer. If you are receiving error
messages when you try to program parts, go to ISP -> Read Device Signature and check below.
1. If the device signature reads all FF’s verify the following:
2. If Flash Magic tells you that it failed to autobaud:
3. If you receive the error message ‘Unable to communicate. (in use) Ensure no other applications
are using the COM Port. Try raising or lowering the baud rate.”
a. The part is oriented in the socket correctly.
b. The USB-ICP is connected to the SAB9 board according to one of the two methods mentioned
c. That you do have a part in the socket.
d. That there is only one part in the board (you cannot program in two different sockets at the same
a. Make sure that the correct device is selected in the device drop-down menu.
a. Make sure that you have the correct port selected and that the baud rate you have selected is the
on Page 3.
time)
rate recommended for the USB-ICP
Error Messages when Using Flash Magic
Frequently Asked Questions
Quick Start Guide
USB-ICP-SAB9
Page 4 of 15
www.teamfdi.com/usb-icp
Rev 1.0