101-0738 Rabbit Semiconductor, 101-0738 Datasheet - Page 25

• Manufacturer Part Number: 101-0738
• Description: CARD ETHERNET 512K SRAM SR9150
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0738

• Accessory Type: Smart Star CPU Card
• For Use With/related Products: SR9150
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.7 Installing I/O Cards
1. Orient the backplane with the CPU Card already installed and facing towards you as
2. Position the new I/O card above the backplane over any unused slot position (
3. Carefully insert the I/O card header into the slot on the backplane and line up the tabs
4. Use the two 4-40 screws supplied with the I/O card to anchor the plastic brackets on the CPU
User’s Manual
shown in Figure 5.
SLOT 6
Dynamic C addresses the I/O cards by slot number.
on the I/O cards with the slots on the backplane as shown in Figure 5.
Card or the I/O card firmly on the backplane. Tighten the screws as needed using a Phillips
screwdriver whose shaft is at least 3" (7 cm) long, but is no thicker than 0.16" (4 mm).
) as shown in Figure 5. Note the slot number and the type of I/O card since
Figure 5. Installing I/O Cards on the Backplane
SLOT 0
to
25