Z8F64210100ZDA Zilog, Z8F64210100ZDA Datasheet - Page 105
Z8F64210100ZDA
Manufacturer Part Number
Z8F64210100ZDA
Description
ADAPTER ICE Z8 ENCORE 64K 44LQFP
Manufacturer
Zilog
Specifications of Z8F64210100ZDA
Module/board Type
*
For Use With/related Products
Z8 Encore!™
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
269-3400
- Current page: 105 of 297
- Download datasheet (9Mb)
PS019921-0308
Caution:
When the Timer Output alternate function TxOUT on a GPIO port pin is en-
1 = Timer Output is forced High (1) when the timer is disabled. When enabled, the
Timer Output is forced Low (0) upon PWM count match and forced High (1) upon
Reload.
CAPTURE mode
0 = Count is captured on the rising edge of the Timer Input signal.
1 = Count is captured on the falling edge of the Timer Input signal.
COMPARE mode
When the timer is disabled, the Timer Output signal is set to the value of this bit.
When the timer is enabled, the Timer Output signal is complemented upon timer
Reload.
GATED mode
0 = Timer counts when the Timer Input signal is High (1) and interrupts are
1 = Timer counts when the Timer Input signal is Low (0) and interrupts are
CAPTURE/COMPARE mode
0 = Counting is started on the first rising edge of the Timer Input signal. The
1 = Counting is started on the first falling edge of the Timer Input signal. The
PRES—Prescale value.
The timer input clock is divided by 2
prescaler is reset each time the Timer is disabled. This insures proper clock division
each time the Timer is restarted.
000 = Divide by 1
001 = Divide by 2
010 = Divide by 4
011 = Divide by 8
100 = Divide by 16
101 = Divide by 32
abled, TxOUT will change to whatever state the TPOL bit is in. The timer does
not need to be enabled for that to happen. Also, the Port data direction sub reg-
ister is not needed to be set to output on TxOUT. Changing the TPOL bit with
the timer enabled and running does not immediately change the TxOUT.
generated on the falling edge of the Timer Input.
current count is captured on subsequent rising edges of the Timer Input signal.
generated on the rising edge of the Timer Input.
current count is captured on subsequent falling edges of the Timer Input signal.
PRES
, where PRES can be set from 0 to 7. The
Z8 Encore! XP
Product Specification
®
F64XX Series
Timers
91
Related parts for Z8F64210100ZDA
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Communication Controllers, ZILOG INTELLIGENT PERIPHERAL CONTROLLER (ZIP)
Manufacturer:
Zilog, Inc.
Datasheet:
Part Number:
Description:
KIT DEV FOR Z8 ENCORE 16K TO 64K
Manufacturer:
Zilog
Datasheet:
Part Number:
Description:
KIT DEV Z8 ENCORE XP 28-PIN
Manufacturer:
Zilog
Datasheet:
Part Number:
Description:
DEV KIT FOR Z8 ENCORE 8K/4K
Manufacturer:
Zilog
Datasheet:
Part Number:
Description:
KIT DEV Z8 ENCORE XP 28-PIN
Manufacturer:
Zilog
Datasheet:
Part Number:
Description:
DEV KIT FOR Z8 ENCORE 4K TO 8K
Manufacturer:
Zilog
Datasheet:
Part Number:
Description:
CMOS Z8 microcontroller. ROM 16 Kbytes, RAM 256 bytes, speed 16 MHz, 32 lines I/O, 3.0V to 5.5V
Manufacturer:
Zilog, Inc.
Datasheet:
Part Number:
Description:
Low-cost microcontroller. 512 bytes ROM, 61 bytes RAM, 8 MHz
Manufacturer:
Zilog, Inc.
Datasheet:
Part Number:
Description:
Z8 4K OTP Microcontroller
Manufacturer:
Zilog, Inc.
Datasheet:
Part Number:
Description:
CMOS SUPER8 ROMLESS MCU
Manufacturer:
Zilog, Inc.
Datasheet:
Part Number:
Description:
SL1866 CMOSZ8 OTP Microcontroller
Manufacturer:
Zilog, Inc.
Datasheet:
Part Number:
Description:
SL1866 CMOSZ8 OTP Microcontroller
Manufacturer:
Zilog, Inc.
Datasheet:
Part Number:
Description:
OTP (KB) = 1, RAM = 125, Speed = 12, I/O = 14, 8-bit Timers = 2, Comm Interfaces Other Features = Por, LV Protect, Voltage = 4.5-5.5V
Manufacturer:
Zilog, Inc.
Datasheet:
Part Number:
Description:
Manufacturer:
Zilog, Inc.
Datasheet: