MCP73871DM-VPCC Microchip Technology, MCP73871DM-VPCC Datasheet - Page 10

• Manufacturer Part Number: MCP73871DM-VPCC
• Description: DEMO BOARD FOR MCP73871
• Manufacturer: Microchip Technology

Specifications of MCP73871DM-VPCC

• Main Purpose: Power Management, Battery Charger
• Embedded: No
• Utilized Ic / Part: MCP73871
• Primary Attributes: 1 Cell- Li-Ion / Li-Pol, 4.2V @ 100 ~ 500mA: USB, 1A: AC Adaptor
• Secondary Attributes: Safety Timer, Thermal Protection, Automatic Charge Termination and Recharge
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

MCP73871 Demo Board with Voltage Proportional Current Control User’s Guide
1.2
1.3
DS51812B-page 10
WHAT IS THE MCP73871 DEMO BOARD WITH VOLTAGE PROPORTIONAL
CURRENT CONTROL?
WHAT THE MCP73871 DEMO BOARD WITH VOLTAGE PROPORTIONAL
CURRENT CONTROL KIT INCLUDES?
The MCP73871 Demo Board with Voltage Proportional Current Control demonstrates
the features of Microchip’s MCP73871 “Stand-Alone System Load Sharing and Li-Ion
/ Li-Poly Battery Charge Management Controller”.The MCP73871 Demo Board with
Voltage Proportional Current Control is designed to deliver minimum 1.5A total current
to system load and to a single cell Li-Ion battery at 4.2V preset voltage regulation (4.1V,
4.35V and 4.4V options are also available for MCP73871). The MCP73871 Demo
Board with Voltage Proportional Current Control has one dip switch (S1) with four poles
to control input current limits, enable charge timer and enable charging. The first switch
decides the input power source between AC-DC wall adapter and USB port (AC/USB).
The second switch of S1 determines the 500 mA high-power USB port or the 100 mA
low-power USB port (High/Low), if the first switch of S1 is enabled (ON). The input
current limit is governed by the USB specification when selecting USB on S1 switch.
The maximum fast current when AC is selected on S1 is programmed by the resistor
R
(see Figure 1-1).
The MCP73871 Demo Board with Voltage Proportional Current Control offers three
status LED (for charge status outputs and a power-good indicator).
The MCP73871 Demo Board with Voltage Proportional Current Control comes with a
factory preset low-battery indicator (LBO) when input is absent. The preset value is
3.2V and STAT1 LED (Green) will turn ON if the battery voltage is below the threshold
voltage.
The MCP73871 Demo Board with Voltage Proportional Current Control is designed to
cover all the features of the MCP73871 device. A thermistor can be added at test points
TP6 and TP7, but resistor R6 must be removed (see the A.2 “Board – Schematic”).
The board layout easily permit to change the two programmable resistors: R
R
This MCP73871 Demo Board with Voltage Proportional Current Control kit includes:
• One MCP73871 Demo Board with Voltage Proportional Current Control,
• Important Information "Read First"
PROG1
PROG3
102-00244
Note:
.
at 1A, and the termination current is set at 100 mA by R
Refer to Table 2-1 for charge status outputs and Figure 2-1 for charge
current setups.
© 2009 Microchip Technology Inc.
PROG3
PROG1
and