IS-DEV KIT-8 NKK Switches, IS-DEV KIT-8 Datasheet - Page 17

• Manufacturer Part Number: IS-DEV KIT-8
• Description: SMARTSWITCH DEVELOPMENT KIT 8
• Manufacturer: NKK Switches
• Series: SmartSwitch™r

Specifications of IS-DEV KIT-8

• Main Purpose: Switches with Programmable Display
• Utilized Ic / Part: SmartSwitch™OLED Rocker Switch
• Primary Attributes: OLED Rocker Switch
• Description/function: SMARTSWITCH Development Kit
• Maximum Operating Temperature: + 70 C
• Operating Voltage: 2.7 V to 5.5 V
• For Use With: 360-2431 - SERIAL CBL RJ11-DB9 FOR DEV KIT360-2430 - POWER SUPPLY 240VAC FOR DEV KIT360-2429 - POWER SUPPLY 120VAC FOR DEV KIT
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Secondary Attributes: -
• Embedded: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: OLED Smartswitch Rocker
• Other names: 360-2421

7850 East Gelding Drive • Scottsdale, AZ 85260-3420
Command to query controller for firmware version
This command queries the controller for the firmware version installed.
Example: The command is sent. The controller responds with the following:
[version] one byte. 11H (version 1.1)
Command for temporarily setting the timers
This command sets both the left and right switch timers.
[timer 1] timer 1. One byte send in HEX format.
[timer 2] timer 2. One byte send in HEX format.
The command sets the timers with the given values and activates them. If a switch is pressed or the timer
expires causes a new attribute become active these values are over written.
This command is useful for determining the best values for animations/movies or slide show.
Command to disable the timer and switch execution
This command disables the timer and switch execution.
The controller disables the timer and switch execution upon receiving this command. However, the switches are
still scanned and reported. They are enabled upon reboot/power up or by command from host.
Command to enable the timer and switch execution
This command enables the timer and switch execution.
The controller enables the timer and switch execution upon receiving this command.
IS-Dev Kit 8 Users Manual A.doc
command format:
transmit format:
command format:
transmit format:
command format:
transmit format:
command format:
transmit format:
61H
61
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone [phone] • Fax [phone]
[version]
11
(xxH) (xxH)
(xxH) (xxH) (xxH)
(xxH) (xxH) (xxH)
(xxH) (xxH) (xxH)
26H
26H
26H
26H
www.nkkswitches.com • Email [e-mail]
79H
79
15H
51H
51H
51H
IS-Dev Kit-8 User Manual
5AH
56H
65H
[timer1] [timer2]
(xxH)
(xxH)
Page 17 of 31
1209