POE-VOICE-RD Silicon Laboratories Inc, POE-VOICE-RD Datasheet - Page 10

• Manufacturer Part Number: POE-VOICE-RD
• Description: KIT REF DESIGN PWR OVER ETHERNET
• Manufacturer: Silicon Laboratories Inc

Specifications of POE-VOICE-RD

• Main Purpose: Reference Design, Power Over Ethernet , Voice Transmission
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: C8051F340, CP2201, Si3400
• Primary Attributes: Embedded Ethernet, Power over Ethernet, 8 kHz Voice Sampling System
• Secondary Attributes: Graphical User Interface
• Processor To Be Evaluated: C8051F340
• Interface Type: Ethernet
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 336-1326

PoE-VOICE-RD
Clicking the second link on the main web page ‘2. Control Yellow LED’ will load the yellow LED control page
shown in Figure 12. Each of the links numbered 1 through 4 on this page borrow the yellow and green LEDs for
10 seconds and force them to the state described in the text. The LED states are restored after 10 seconds or if the
5th link ‘5. Restore LED State’ is pressed.
When finished cycling through the various LED states, click the ‘Home’ link to return to the main page.
Figure 12. Yellow and Green LED Control Page
7.3. Sending an E-mail Containing the Latest Sensor Data
To send an e-mail, the two pieces of information needed are the address of an SMTP server and the destination
e-mail address. This information can be entered in the HTML form on the main web page as shown in Figure 13.
On most networks, the SMTP server can be located by typing “ping mail” at the command prompt or asking a
system administrator. If the SMTP server address is unknown, a free software SMTP server that turns any
Windows PC into an outgoing mail server is available for download from http://www.postcastserver.com. Once the
software SMTP is running, use the PC’s IP address as the SMTP server address. The SMTP server address
cannot contain any letters—only numbers are permitted. The destination e-mail address must be less than 50
characters.
Figure 13. HTML Form Used For Sending E-Mail
10
Rev. 0.2