DLP-2232ML-G DLP Design Inc, DLP-2232ML-G Datasheet - Page 2

• Manufacturer Part Number: DLP-2232ML-G
• Description: MODULE USB ADAPTR FOR FT2232D LP
• Manufacturer: DLP Design Inc

Specifications of DLP-2232ML-G

• Main Purpose: Interface, USB 2.0 to UART (RS232) Bridge
• Embedded: No
• Utilized Ic / Part: FT2232D
• Primary Attributes: Full Speed USB to High-Speed UART
• Secondary Attributes: Royalty-Free Drivers, 2K EEPROM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 813-1001

2.0 Module Pin-Out
2.1 Pin Definitions
Since the DLP-2232ML-G does not have a USB connector, the USBDM and USBDP
signal lines are brought out on pins 23 and 22 as shown here.
With the exception of the 2 USB communications lines (USBDP and USBDM) and pin
20, the pinout for the DLP-2232ML-G is the same as the DLP-2232M-G module. Please
refer to the datasheet for the DLP-2232M-G for a complete description of the pinout.
Rev 2.1 (July 2008)
Figure 2. Pin-Out (40 Pin DIP Header )
20
1
2
40
21
DLP-2232ML-G DLP Design, Inc.