MCP3905RD-PM1 Microchip Technology, MCP3905RD-PM1 Datasheet - Page 13

• Manufacturer Part Number: MCP3905RD-PM1
• Description: REFERENCE DESIGN FOR MCP3905
• Manufacturer: Microchip Technology

Specifications of MCP3905RD-PM1

• Main Purpose: Power Management, Energy/Power Meter
• Embedded: No
• Utilized Ic / Part: MCP3905/6
• Primary Attributes: 1-Phase, 220 VAC, In Case, With Mechanical Counter
• Secondary Attributes: On Board Transformerless AC/DC 5V Supply
• Silicon Manufacturer: Microchip
• Silicon Core Number: MCP3905A,MCP3906A
• Kit Application Type: Power Management
• Application Sub Type: Energy Meter
• Kit Contents: Design Guides
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.14
HF
supplies the instantaneous real-power information. The
output is a periodic pulse output, with its period
proportional to the measured active (real) power, and to
the HF
states. This output is the preferred output for calibration
due to faster output frequencies, giving smaller
calibration times. Since this output gives instantaneous
active (real) power, the 2ω ripple on the output should
be noted. However, the average period will show
minimal drift.
3.15
F
device that supply the average real-power information.
The outputs are periodic pulse outputs, with its period
proportional to the measured active (real) power, and to
the F
states. These pins include high-output drive capability
for direct use of electromechanical counters and
2-phase stepper motors. Since this output supplies
average active (real) power, any 2ω ripple on the output
pulse period is minimal.
© 2009 Microchip Technology Inc.
OUT0
OUT
c
C
and F
constant, defined by the F0 and F1 pin logic
is the high-frequency output of the device and
High-Frequency Output (HF
Frequency Output (F
constant defined by F0, F1 and F2 pin logic
OUT1
are the frequency outputs of the
OUT0
, F
OUT
OUT1
)
)
MCP3905/06
DS21948E-page 13