AT88SC-DK1 Atmel, AT88SC-DK1 Datasheet - Page 4

• Manufacturer Part Number: AT88SC-DK1
• Description: KIT DEV FOR AT88SCXXXXC FAMILY
• Manufacturer: Atmel
• Series: CryptoMemory®r

Specifications of AT88SC-DK1

• Main Purpose: Memory, EEPROM
• Embedded: Yes
• Utilized Ic / Part: AT88SCxx
• Primary Attributes: Aris Secure Serial EEPROM
• Secondary Attributes: 1k ~ 256k
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ÏÏÏÏ
Troubleshooting
1. Make sure CryptoMemory is properly inserted and aligned in the SOIC socket. The
2. Verify your hardware setup for accurate signal and power connections.
3. Make sure VCC is connected to a high-drive power supply.
4. Make sure your system meets pull-up resistor requirements on signal lines as defined in
5. Make sure to include noise filtering capacitors between Vcc and GND at the device
6. Read and Write CryptoMemory’s Memory Test Zone (MTZ) field to verify connectivity.
correct orientation places PIN 0 of the SOIC package towards the adaptor board header
pins. When correctly oriented, holding the adaptor board with header pins towards self
should present the marking texts on the CryptoMemory package right side up.
CryptoMemory datasheets
level, if working with a noisy system.
MTZ is free of all security requirements at all times.
5253-SMEM-05/07