CP2201EK Silicon Laboratories Inc, CP2201EK Datasheet - Page 4

• Manufacturer Part Number: CP2201EK
• Description: KIT EVAL FOR CP2201 ETH CTRLR
• Manufacturer: Silicon Laboratories Inc
• Type: Controllers & Processorsr

Specifications of CP2201EK

• Main Purpose: Interface, Ethernet Sensor
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: CP2200, CP2201
• Primary Attributes: Temperature and Light Sensor
• Secondary Attributes: Graphic User Interface
• Interface Type: Ethernet
• Product: Modules
• Silicon Manufacturer: Silicon Labs
• Silicon Core Number: CP2201
• Silicon Family Name: CP220x
• Kit Contents: CP2201 Evaluation Board, Power Adapter, CAT5e Ethernet Cable, CD-ROM, Quick-Start Guide
• For Use With/related Products: CP2201
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 336-1316

CP2201-EK
.
4
5. If the network does not have a DHCP server, then the CP2201EB will search for approximately 35 seconds
6. Enter the IP address, subnet mask, and default gateway (if known) into the ‘Assign IP Address’ dialog and
before going into static IP address mode. While searching, the yellow led will be blinking fast. After going
into static IP address mode, Netfinder will display information about the device in a window with a yellow
background. Select the device by clicking inside the yellow area and pressing the Assign IP button as
shown in Figure 5.
press OK. See Appendix A for information on how to configure the PC with a static IP address and how to
select a static IP address for the CP2201EB. A windows command line window should appear, ping the
device at its new address, then close. Programming is successful when the progress bar stops and gives
the message “Success - Device Programmed” as shown in Figure 6.
Figure 6. Assign IP Address Dialog
Figure 5. Static IP Address Mode
Rev. 0.1