DK-04D0-0395 LIGHTING SCIENCE GROUP CORPORATION, DK-04D0-0395 Datasheet - Page 5

• Manufacturer Part Number: DK-04D0-0395
• Description: KIT DEV ATLAS 5500K WHT 230VAC
• Manufacturer: LIGHTING SCIENCE GROUP CORPORATION
• Series: Atlas™r

Specifications of DK-04D0-0395

• Main Purpose: Lighting, LED Light Engine, RGB
• Embedded: No
• Utilized Ic / Part: Atlas White LED Light Engines
• Primary Attributes: 2 700mA White Light Engines, Warm White and Daylight White Versions
• Secondary Attributes: 30° Lens and 45° Lens
• Kit Contents: (1) 521-1029-1-ND - LED ARRAY WHITE 3000K 700MA(1) 521-1023-ND - LENS OPTIC WIDE W/HOLDER BL-4000(1) 521-1022-ND - LENS OPTIC MEDIUM W/HLDR BL-4000(1) 521-1021-ND - LENS OPTIC NARROW W/HLDR BL-4000(1) 521-1018-1-ND - LED ARRAY WHITE .80 SMD
• Supply Voltage: 230 V
• For Use With/related Products: BL-4000 series
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 521-1034

Attaching to Your Fixture or Assembly
The Light Engine Assembly can be mounted in several configurations. Ideally, the light engine should be configured horizontally,
thereby allowing the heat to radiate through the vertically oriented fins. Alternate assembly positions are also possible. The orientation
of the fins will determine how efficiently the heat sink can dissipate the thermal energy.
Configuration options with BL-4000 White Light Engines
Both BL-4000 White light engines can be connected in series and driven simultaneously using the included 700mA 17W constant
current driver. This is useful for a side by side comparison of the light properties of the BL-4000 Warm White and White 5500K
light engines. Two spare DC connection cables are provided to construct a cable for this purpose. A simple way to construct the
cable is to cut the two spare cables in half and stripping the wire lead ends about 3/8” (9mm) on three of the halves. Plug the
connectors of these three cable halves into the driver and each light engine assembly. Finally, connect the stripped leads as
indicated in the figure below by twisting the stripped ends together.
Handling Precaution
Contact with the silicone based encapsulant on the surface of the light engine must be avoided to prevent damage. Do not apply
pressure to the silicone based encapsulant or allow it to come into contact with sharp objects. Lamina LED light engines must be
handled from the sides.
Further Prototyping Information and Support
Additional information regarding the BL-4000 series of Light Engines, Optics, Heat Sinks, Accessories, Developer Kits, compatible
Drivers, and Applications Notes can be found by visiting Lamina’s website, www.LaminaCeramics.com.
Also, please visit Lamina’s website, www.LaminaCeramics.com, for more information on Lamina’s complete line of LED light engines
and Lamina’s worldwide distribution network.
FM-0128 REV A 11.15.05
about your design, contact Lamina at 800.808.5822 or 609.265.1401 or visit www.laminaceramics.com.
To see how you can realize all these design benefits, to request a sample, or to speak with an engineer
Specifications subject to change without notice • ©2005 Lamina Ceramics, Inc. • FM-0128 Rev A 11.15.05
Xitanium
700mA 17W
Constant Current
Driver
Lamina Ceramics • 120 Hancock Lane • Westampton, NJ 08060 • USA
Connecting 2 Lamina BL-4000 White Light Engines
TM
Outputs
DC
+
-
V- V+
V- V+
5