MAX5393EVKIT+ Maxim Integrated Products, MAX5393EVKIT+ Datasheet - Page 3

• Manufacturer Part Number: MAX5393EVKIT+
• Description: KIT EVALUATION FOR MAX5393
• Manufacturer: Maxim Integrated Products

Specifications of MAX5393EVKIT+

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

•
•
•
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
directly from the EV kit software. Text in bold_and_under-
lined refers to items from the Windows operating system.
The MAX5393 EV kit is fully assembled and tested.
Follow the steps below to verify board operation:
1)
2)
3)
4)
5)
MAX5393 EV system
User-supplied Windows 2000, Windows XP, or
Windows Vista PC with a spare USB port
One or two multimeters
Visit
load the latest version of the EV kit software,
5393Rxx.ZIP. Save the EV kit software to a tempo-
rary folder and uncompress the ZIP file.
Install the EV kit software on the computer by run-
ning the INSTALL.EXE program inside the tempo-
rary folder. The program files are copied and icons
are created in the Windows Start_|_Programs menu.
Verify that shunts are correctly installed on the jump-
ers, as listed in Table 1, for proper operation of the
EV kit.
Connect the multimeters to measure voltage across
the MAX5393 (U3) WA and LA PCB pads and WB
and LB PCB pads.
Connect the MINIQUSB+ interface board to the EV
kit J2 and J3 connectors.
MAX5393 EV kit
MINQUSB+ command module (USB cable
included)
www.maxim-ic.com/evkitsoftware
________________________________________________________________________________________ _ 3
Required Equipment
Quick Start
Procedure
MAX5393 Evaluation System
to down-
6)
7)
8)
9)
10) Using the Device_ Connected combo box, select
11) The MAX5393 EV kit is now ready for additional
Connect the included USB cable from the PC to
the MINIQUSB+ interface board. A Building_Driver_
Database window pops up in addition to a New_
Hardware_ Found message when installing the
USB driver for the first time. If a window is not seen
that is similar to the one described above after
30s, remove the USB cable from the board and
reconnect it. Administrator privileges are required
to install the USB device driver on Windows 2000,
Windows XP, and Windows Vista.
Follow the directions of the Add_ New_ Hardware_
Wizard to install the USB device driver. Choose the
Search_for_the_best_driver_for_your_device option.
Specify the location of the device driver to be
C:\Program_ Files\MAX5393 (default installation
directory) using the Browse button. During device
driver installation, Windows may show a warning
message indicating that the device driver Maxim
uses does not contain a digital signature. This is
not an error condition and it is safe to proceed
with installation. Refer to the USB_Driver_Help.PDF
document included with the software if you have
problems during this step.
Start the EV kit software by opening its icon in the
Start_|_Programs menu.
Observe as the program automatically detects the
USB connection and starts the main program.
MAX5393 from the list and then press the Default
button. The EV kit software main window appears,
as shown in Figure 1.
testing.