SI3402-EVB Silicon Laboratories Inc, SI3402-EVB Datasheet - Page 18

• Manufacturer Part Number: SI3402-EVB
• Description: BOARD EVAL POE FOR SI3402
• Manufacturer: Silicon Laboratories Inc
• Type: PWM Controllersr

Specifications of SI3402-EVB

• Main Purpose: Special Purpose DC/DC, Power Over Ethernet
• Outputs And Type: 1, Non-Isolated
• Voltage - Output: 5V
• Voltage - Input: 44 ~ 57V
• Regulator Topology: Buck
• Frequency - Switching: 350kHz
• Board Type: Fully Populated
• Utilized Ic / Part: Si3402
• Input Voltage: 5 V
• Output Voltage: 3.3 V
• Interface Type: Ethernet
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Product: Power Management Modules
• For Use With/related Products: Si3402
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Output: -
• Power - Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1827

Si3402
6. Recommended Land Pattern
18
Notes:
General
Solder Mask Design
Stencil Design
Card Assembly
1. All dimensions shown are in millimeters (mm) unless otherwise noted.
2. Dimensioning and Tolerancing is per the ANSI Y14.5M-1994 specification.
3. This Land Pattern Design is based on the IPC-7351 guidelines.
4. All metal pads are to be non-solder mask defined (NSMD). Clearance between the solder mask and the
5. A stainless steel, laser-cut and electro-polished stencil with trapezoidal walls should be used to assure
6. The stencil thickness should be 0.125 mm (5 mils).
7. The ratio of stencil aperture to land pad size should be 1:1 for all perimeter pins.
8. A 2x2 array of 1.2 mm square openings on 1.4 mm pitch should be used for the center ground pad.
9. A No-Clean, Type-3 solder paste is recommended.
10. The recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body
metal pad is to be 60 µm minimum, all the way around the pad.
good solder paste release.
Components.
Symbol
P1
P2
X1
Y1
C1
C2
E
Figure 6. Si3402 Recommended Land Pattern
Table 14. PCB Land Pattern Dimensions
Min
2.70
2.70
0.25
0.90
Rev. 1.2
Nom
2.75
2.75
0.30
0.95
4.70
4.70
0.80
Max
2.80
2.80
0.35
1.00