EVL6566B-40WSTB STMicroelectronics, EVL6566B-40WSTB Datasheet - Page 40

• Manufacturer Part Number: EVL6566B-40WSTB
• Description: BOARD EVAL FOR L6566B
• Manufacturer: STMicroelectronics

Specifications of EVL6566B-40WSTB

• Main Purpose: AC/DC, Primary Side
• Outputs And Type: 4, Isolated
• Power - Output: 40W
• Voltage - Output: 5V, 12V, 1.8V, 3.3V
• Current - Output: 2.4A, 1.9A, 1.73A, 500mA
• Voltage - Input: 90 ~ 264VAC
• Regulator Topology: Flyback
• Frequency - Switching: 62kHz
• Board Type: Fully Populated
• Utilized Ic / Part: L6566B
• Product: Power Management Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-6450

Application information
5.13
Note:
40/51
Slope compensation
The pin MODE/SC (12), when not connected to VREF, provides a voltage ramp during
MOSFET’s ON-time synchronous to that of the internal oscillator sawtooth, with 0.8 mA
minimum current capability. This ramp is intended for implementing additive slope
compensation on current sense. This is needed to avoid the sub-harmonic oscillation that
arises in all peak-current-mode-controlled converters working at fixed frequency in
continuous conduction mode with a duty cycle close to or exceeding 50 %.
Figure 27. Slope compensation waveforms
The compensation will be realized by connecting a programming resistor between this pin
and the current sense input (pin 7, CS). The CS pin has to be connected to the sense
resistor with another resistor to make a summing node on the pin. Since no ramp is
delivered during MOSFET OFF-time (see
programming resistor is needed to ensure a clean operation at light loads.
The addition of the slope compensation ramp will reduce the available dynamics of the
current signal; thereby, the value of the sense resistor must be determined taking this into
account. Note also that the burst-mode threshold (in terms of power) will be slightly
changed.
If slope compensation is not required with FF operation, the pin shall be left floating.
MODE/SC
oscillator
(pin 12)
Internal
(pin 4)
GD
Figure 27
), no external component other than the
t
t
t
L6566B