CY3280-SRM Cypress Semiconductor Corp, CY3280-SRM Datasheet - Page 2

• Manufacturer Part Number: CY3280-SRM
• Description: MODULE RADIAL SLIDER CAPSENSE
• Manufacturer: Cypress Semiconductor Corp
• Series: CapSense™r

Specifications of CY3280-SRM

• Mfg Application Notes: CapSense Best Practices - AppNote Capacitance Sensing - AppNote
• Design Resources: CY3280-SRM Schematic
• Sensor Type: Touch, Capacitive
• Sensing Range: 4 Buttons/Keys, 10 Segment Radial Slider
• Interface: Analog
• Interface Type: I2C
• Operating Voltage: 5 V
• Silicon Manufacturer: Cypress
• Silicon Core Number: CY3280-20x66
• Kit Application Type: Sensing - Touch / Proximity
• Application Sub Type: Capacitive Touch
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 428-2987 - CAPSENSE CONTROLLER DEV KIT
• Voltage - Supply: -
• Sensitivity: -
• Utilized Ic / Part: -
• Embedded: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 428-2988

1. Kit Contents
Each CY3280-SRM Universal CapSense™ Radial Slider Module Kit contains:
Universal CapSense Module boards are available for purchase separately, or as part
of combination kits. Do visit
Prerequisites:
2. Module Hardware
This module is comprised of components and sensors detailed in the following figure.
The module consists of four CapSense buttons, one radial slider (with twelve sensors),
and four LEDs. These are interfaced to the CapSense controller board via 44 pin
receptacle connector (J1). A three pin jumper (J2) is provided for selection between
shield electrode and ground. The board also incorporates an optional I2C EEPROM
and thermistor that are not populated by default.
Page 2
■
■
■
■
■
■
■
■
■
CY3280-SRM Universal CapSense Module Board
CY3280-SRM Universal CapSense Module Board CD/DVD
CY3280-SRM Quick Start
3 mm Acrylic Overlay with adhesive
1.5 mm Acrylic Overlay with adhesive
Universal CapSense Controller Board
PSoC MiniProg
I2CUSB Bridge
USB Mini-B Cable
Radial Slider
Sensors
CapSense Matrix Buttons and LEDs
Optional I2C EEPROM
Footprint
(On Reverse Side)
www.cypress.com/shop
for more information.
Shield Selection Jumper (J2)
Connector (J1)
44 Pin CapSense
Optional Thermistor
Footprint
(On Reverse Side)
Voltage Test
Points
[+] Feedback