STV-676-E01 STMicroelectronics, STV-676-E01 Datasheet - Page 12

• Manufacturer Part Number: STV-676-E01
• Description: KIT EVAL FOR STV0676 DSP
• Manufacturer: STMicroelectronics

Specifications of STV-676-E01

• Sensor Type: CMOS Imaging, Color (RGB)
• Sensing Range: VGA
• Interface: I²C, Digiport
• Sensitivity: 30 fps
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: STV0676, VV6411, VV6501
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Voltage - Supply: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-3888; STV-676-E01

External interfaces
2.7
2.8
2.9
2.10
12/22
CheckSum
The checksum is calculated by adding the byte value of EEPROM locations 0 to 12
inclusive, the low order byte of the result is stored in location 13.
I
STV0676 can be configured to behave as an I
configured by host devices other than PCs. Details of the I
description of the I
Digiport
The Digiport is a 10-bit bi-directional data port which can be used to transfer video data in or
out of the device. This port can also be used to configure USB descriptor information at
power up see (
from STMicroelectronics.
General purpose input and output
STV0676 provides up to 8 pins which can be used as general purpose I/O. These pins can
be used to interface to led’s, buzzers, switches etc.
2
C slave mode
Section 2.3
2
C register bank are available from STMicroelectronics.
). Full details on the digiport operation and control are available
2
C slave. This allows the device to be
2
C messages supported and
STV0676