MCP9800DM-DL2 Microchip Technology, MCP9800DM-DL2 Datasheet - Page 5

• Manufacturer Part Number: MCP9800DM-DL2
• Description: BOARD DEMO 2 FOR MCP9800
• Manufacturer: Microchip Technology

Specifications of MCP9800DM-DL2

• Sensor Type: Temperature
• Sensing Range: -55°C ~ 125°C
• Interface: I²C, SMBus
• Sensitivity: ±0.5°C
• Voltage - Supply: 2.7 V ~ 5.5 V
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP9800
• Processor To Be Evaluated: MCP9800, MCP101, PIC10F202, 24LC16B
• Interface Type: I2C
• Lead Free Status / RoHS Status: Not applicable / Not applicable

INTRODUCTION
DOCUMENT LAYOUT
© 2007 Microchip Technology Inc.
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
Select the Help menu, and then Topics to open a list of available on-line help files.
This chapter contains general information that will be useful to know before using the
MCP9800 Temperature Data Logger Demo Board 2. Items discussed in this chapter
include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Web Site
• Customer Support
• Document Revision History
This document describes how to use the MCP9800 Temperature Data Logger Demo
Board 2. The manual layout is as follows:
• Chapter 1. “Product Overview” – Important information about the MCP9800
• Chapter 2. “Installation and Operation” – Demonstrates what programs need
• Appendix A. – “Schematic and Bill of Materials (BOM)”
Temperature Data Logger Demo Board 2.
to be installed and how to program the microcontroller on the PCB, as well as
reading the data out and displaying the data in an Excel
NOTICE TO CUSTOMERS
MCP9800 TEMPERATURE DATA LOGGER
Preface
DEMO BOARD 2 USER’S GUIDE
®
spreadsheet.
®
IDE on-line help.
DS22027A-page 1