MCP9800DM-DL Microchip Technology, MCP9800DM-DL Datasheet - Page 9

• Manufacturer Part Number: MCP9800DM-DL
• Description: BOARD DEMO FOR MCP9800
• Manufacturer: Microchip Technology

Specifications of MCP9800DM-DL

• Sensor Type: Temperature
• Sensing Range: -55°C ~ 125°C
• Interface: I²C, SMBus
• Sensitivity: ±0.5°C
• Voltage - Supply: 2.7 V ~ 5.5 V
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP9800
• Processor To Be Evaluated: MCP9800
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

Thermal Management Products
MCP9800 Thermal Sensor PICtail™
Demonstration Board
thermal sensing capability to any existing application.
This basic sensor functionality is implemented on a
small Printed Circuit Board (PCB) and an interface via a
standard 100 mil header.
MCP9800 Temperature Data Logger
Demonstration Board
Part Number: MCP9800DM-DL
Allows users to store up to 128000 temperature readings
from the MCP9800 sensor to the 24LC1025, Microchip’s
1024 Kbit EEPROM. A PIC16F684 microcontroller
communicates with the sensor and EEPROM. In addition,
the PIC® microcontroller interfaces to a PC using the
PICkit™ 1 Flash Starter Kit and transfers the temperature
readings from the EEPROM to the PC. Microsoft Excel can
be used to view the data.
Power Management Products
MCP1252 Charge Pump Backlight
Demonstration Board
the use of ballast resistors. A PIC10F206 MCU provides
an enable signal to the MCP1252 and accepts a push-
button input that allows the white LEDs to be adjusted to
five different light intensities.
MCP1650 Boost Controller Evaluation Board
Part Number MCP1650EV
Demonstrates the MCP165X Boost
Controller product family in two high-
power, boost-converter applications.
MCP7384X Li-Ion Battery Charger
Evaluation Board
A
NALOG
D
EMONSTRATION AND
Part Number: MCP7384XEV
Three circuits use MCP73841,
MCP73842 and MCP73843 devices
to demonstrate simple, stand-alone,
linear charging of single- or dual-cell,
Lithium-Ion/Lithium-Polymer battery
packs (battery packs are not included).
Part Number: MCP1252DM-BKLT
Demonstrates the use of a charge
pump device in an LED application
and acts as a platform to evaluate
the MCP1252 device in general. Light
intensity is controlled uniformly through
Part Number MCP9800DM-PCTL
The MCP9800 demonstration board
illustrates how to interface the
MCP9800 to a PIC® microcontroller.
The board can also be used as a
stand-alone module to quickly add
E
VALUATION
K
IT
E
XAMPLES
Linear Products
MCP6S22 PGA PICtail™ Demonstration Board
between the PIC® microcontroller and PGA devices, while
allowing modification and development of firmware for
specific
MCP6SX2 PGA Photodiode PICtail™
Demonstration Board
Part Number MCP6SX2DM-PCTLPD
Opens possibilities to process other
sensor signals. Increases the number
of PIC microcontroller I/O pins available
for other purposes. Features a PNZ334
photo-diode, MCP6001U op amp and
MCP6S22 and MCP6S92 Programmable
Gain Amplifiers (PGA).
Mixed-Signal Products
MCP3551 Delta-Sigma ADC
Demonstration Board
MCP3905 Energy Meter Evaluation Board
Part Number: MCP3905EV
This evaluation board is designed to test out a variety
of energy meter designs. On the input side high voltage
line and load AC-plug headers are included, along with
mounting holes for shunts, current transformers and
screw-type connections for wiring. On the output side
a large prototype area is included along with optical
isolation and a standard PICtail™ header for experiments
with a variety of PIC® microcontroller based energy meter
designs.
Interface Products
MCP2140 IrDA ® Wireless Temp
Demonstration Board
requirements.
Part Number: MCP3551DM-PCTL
Designed to demonstrate the MCP3551
device’s 22-bit Delta-Sigma Analog-to-
Digital (ADC) Converter performance using
DataView™ software installed on a PC. This
demo board can be used with MPLAB®
ICD 2, PICkit™ 1 Flash Starter Kit or
PICkit™ 2 Development Programmer for
developing demonstration/evaluation
firmware.
Part Number MCP2140DM-TMPSNS
Demonstrates the MCP2140 device in
a real-world application. Shows how to
integrate an IrDA® standard port.
Part Number MCP6S22DM-PICTL
This board evaluates/demonstrates
Microchip’s MCP6S21/2/6/8
Programmable Gain Amplifier (PGA)
family. Interface this board with
the PICkit™ 1 Flash Starter Kit to
demonstrate firmware integration