CYIL2SM1300-EVAL Cypress Semiconductor Corp, CYIL2SM1300-EVAL Datasheet - Page 2

• Manufacturer Part Number: CYIL2SM1300-EVAL
• Description: BOARD EVAL IMG SENS LUPA-1300-2
• Manufacturer: Cypress Semiconductor Corp

Specifications of CYIL2SM1300-EVAL

• Sensor Type: CMOS Imaging, Monochrome
• Sensing Range: 1.3 Megapixel
• Interface: SPI
• Sensitivity: 500 fps
• Voltage - Supply: 2.5 V ~ 3.3 V
• Embedded: No
• Utilized Ic / Part: LUPA-1300-2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Overview
This data sheet describes the interface of the LUPA1300-2
image sensor. The SXGA resolution CMOS active pixel sensor
features synchronous shutter and a maximal frame rate of
500 fps in full resolution. The readout speed is boosted by sub
sampling and the windowed region of interest (ROI) readout.
FPN correction cannot be used in conjunction with sub-sampling
and windowed region of interest readout. High dynamic range
scenes can be captured using the double and multiple slope
functionality. User programmable row and column start and stop
positions enables windowing. Sub sampling reduces resolution
while maintaining the constant field of view and an increased
frame rate.
The LUPA1300-2 sensor has 12 LVDS high speed outputs that
transfer image data over longer distances. This simplifies the
surrounding system. The LVDS interface can receive high speed
and wide bandwidth data signals and maintain low noise and
distortion. A special training mode enables the receiving system
to synchronize the coming data stream when switching to
master, slave, or triggered mode. The image sensor also
integrates a programmable offset and gain amplifier for each
channel.
A 10-bit ADC converts the analog data to a 10-bit digital word
stream. The sensor uses a 3-wire Serial-Parallel Interface (SPI).
It requires only one master clock for operation up to 500 fps.
The sensor is available in a monochrome version or Bayer (RGB)
patterned color filter array. It is placed in a 168-pin ceramic µPGA
package.
Document Number: 001-24599 Rev. *C
Specifications
Table 1. General Specifications
Table 2. Electro Optical Specifications
Active Pixels
Pixel Size
Pixel Type
Pixel Rate
Shutter Type
Frame Rate
Master Clock
Windowing (ROI)
Read Out
ADC Resolution
Sensitivity
Extended Dynamic
Range
Conversion gain
Full well charge
Responsivity
Fill factor
Parasitic light sensitivity
Dark noise
QE x FF
FPN
PRNU
Dark signal
Power dissipation
Parameter
Parameter
1280 (H) x 1024 (V)
14 µm x 14 µm
6T pixel architecture
630 Mbps per channel (12 serial
LVDS outputs)
Pipelined and Triggered Global
Shutter
500 fps at 1.3 Mpixel (boosted by
subsampling and windowing)
315 MHz for 500 fps
Randomly programmable ROI read
out up to four multiple windows
Windowed, flipped, mirrored, and
subsampled read out possible
10-bit, on-chip
10.16 V/lux.s at 550 nm
Multiple slope (up to 90 dB optical
dynamic range)
34µV/e
30000e
7350 V.m
40%
< 1/10000
37e
35% at 680 nm
2% rms of the output swing
<1% rms of the output signal
170 mV/s at 30°C
1350 mW
-
CYIL2SM1300AA
-
-
Specifications
2
/W.s at 680 nm
Value
Page 2 of 41
[+] Feedback