101-0680 Rabbit Semiconductor, 101-0680 Datasheet - Page 75

• Manufacturer Part Number: 101-0680
• Description: KIT DEV RABBITCORE/RCM3700
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r
• Type: MPU Moduler

Specifications of 101-0680

• Rohs Status: RoHS non-compliant
• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: RCM3700
• Data Bus Width: 8 bit
• Interface Type: Ethernet
• For Use With/related Products: RCM3700
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1038

The sample program
ing Board is pressed. Follow the instructions included with the sample program. LED DS1
on the Prototyping Board will light up when sending e-mail. Note that pin PB7 is con-
nected to both switch S2 and to the external I/O bus on the Prototyping Board, and so
switch S2 should not be used with Ethernet operations.
6.6.1 RabbitWeb Sample Programs
You will need to have the Dynamic C RabbitWeb module installed before you run the
sample programs described in this section. The sample programs can be found in the
PLES\RCM3700\TCPIP\RABBITWEB
•
•
•
•
•
•
RabbitCore RCM3700 User’s Manual
BLINKLEDS.C
which the DS1 and DS2 LEDs on the RCM3700 Prototyping Board or the RCM3720
Prototyping Board blink.
DOORMONITOR.C
in to the RCM3700 Prototyping Board when using this sample program. This program
demonstrates adding and monitoring passwords entered via the LCD/keypad module.
HANGMAN_GAME.C
guessing game demonstrates some RabbitWeb capabilities using the RCM3720 Proto-
typing Board.
LEDS_CHECKBOX.C
some RabbitWeb features to control digital I/O using the RCM3720 Prototyping Board.
SPRINKLER.C
puts in a 24-hour period using the RCM3700 Prototyping Board or the RCM3720
Prototyping Board.
TEMPERATURE.C
RCM3700 Prototyping Board to measure temperature, and it also demonstrates some
simple
message will be sent if the current temperature exceeds the minimum or maximum lim-
its set by the user.
Before running this sample program, you will have to install the thermistor included in
the RCM3700 Development Kit at location J7 on the RCM3700 Prototyping Board,
which is connected to analog input THERM_IN7.
#web
variable registration along with the authentication features. An e-mail
—This program demonstrates a basic example to change the rate at
—This program demonstrates how to schedule times for the digital out-
—The optional LCD/keypad module (see Appendix C) must be plugged
—This program demonstrates the use of a thermistor with the
SMTP.C
—This sample program based on the children's hangman word
—This sample program provides a bare-bones sample of using
allows you to send an e-mail when a switch on the Prototyp-
folder.
SAM-
73