CY3210-MINIPROG1 Cypress Semiconductor Corp, CY3210-MINIPROG1 Datasheet - Page 6

• Manufacturer Part Number: CY3210-MINIPROG1
• Description: BOARD DEMO MINIPROG1
• Manufacturer: Cypress Semiconductor Corp
• Series: PSoC®r
• Type: MCUr

Specifications of CY3210-MINIPROG1

• Contents: Eval. Board, MiniProg Programmer, Cable and Software
• Processor To Be Evaluated: CY8C29466-24PXI
• Interface Type: USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: PSoC MCUs (except CY8C25/26)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 428-1585

SPECIFICATIONS FOR MINIPROG
The operating temperature of the MiniProg is from 0° C to 50° C.
Always plug the USB cable into the MiniProg before attaching it
to the five-pin header on the board.
When using an ISSP adapter cable with MiniProg, keep the length
under six inches to avoid signal integrity issues.
When using MiniProg, the LEDs blink at a variable rate to track
connection status. The green LED near the USB connector turns
on after MiniProg is plugged into the computer and configured by
the OS. If MiniProg cannot find the correct driver in the system,
this LED will not turn on. After the device has been configured,
the LED stays on at about a 4-Hz blink rate. This changes during
programming, where the blink duty cycle increases.
The red LED at the bottom turns on when the MiniProg powers the
part. The LED is off when power is provided by the target board.
6