CY3209-EXPRESSEVK Cypress Semiconductor Corp, CY3209-EXPRESSEVK Datasheet - Page 61

• Manufacturer Part Number: CY3209-EXPRESSEVK
• Description: EVAL KIT WORLDTOUR2
• Manufacturer: Cypress Semiconductor Corp
• Series: PSoc Express™r
• Type: MCUr

Specifications of CY3209-EXPRESSEVK

• Contents: Evaluation Board, LCD Module, MiniProng Programming Unit, 2 AWP24S, cable, 9V battery and software
• Silicon Manufacturer: Cypress
• Core Architecture: PSoC
• Silicon Family Name: PSoC
• Kit Contents: Express Eval Board, LCD Module, Programmer, Two 2.4GHz Radios, Battery, Cables, Literature And Software
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: -
• Lead Free Status / Rohs Status: Supplier Unconfirmed
• Other names: 428-2025

8.1
8.1.1
8.1.2
8.1.3
8.1.4
8.1.5
CY3209-ExpressEVK Kit Guide, Doc. # 001-16798 Rev. **
8.
Cypress
This lab implements a wireless tilt sensor. The lab creates two projects: a WirelessUSB slave and a
WirelessUSB master. The slave device transmits information from a dual axis accelerometer to the
master device. The master device uses this information to display the XY tilt on the 8 LEDs in the
bottom left quadrant of the master demonstration board. The LED pattern is also transmitted back to
the slave device for display on the slave demonstration board.
This lab requires two CY3209 kits.
WirelessUSB Master/Slave Lab – Slave
Description
This project is the slave device for the WirelessUSB Master/Slave lab. The project includes a dual
axis accelerometer input and a pair of 4-bit banked logic output drivers that control 8 LEDs. The
accelerometer information is transmitted to a WirelessUSB master using a WirelessUSB interface
driver. The slave's interface driver also captures the LED pattern sent back by the master into inter-
face valuators. These values are then used to light the slave LEDs.
Note: This project will not work unless the Add Driver Dialog option is selected. To use the Add
Driver Dialog, ensure View
Board Quadrant
Bottom Left
PSoC Device
CY8C27643
Finished Project Location
\PSoCExpressExamples\CY3209WUSBTiltSlave\CY3209WUSBTiltSlave.app on the kit
CD.
Start a New Project
1. Select File
2. Name the project CY3209WUSBTiltSlave.
3. If needed, change the project location using Browse to move to a different folder.
4. Click OK.
→
New Project.
WirelessUSB™
→
Use Add Driver Dialog is checked.
Master/Slave Lab 2
61