CY3280-BK1 Cypress Semiconductor Corp, CY3280-BK1 Datasheet - Page 8

• Manufacturer Part Number: CY3280-BK1
• Description: KIT UNIVERSAL CAPSENSE CTRLR
• Manufacturer: Cypress Semiconductor Corp
• Series: PSoC® CapSenser
• Type: DSPr

Specifications of CY3280-BK1

• Contents: 2 Controller Boards, 2 Modules, USB Board, Mini Programmer, Cables and Software
• Interface Type: USB, I2C, SPI
• Operating Voltage: 2.4 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Silicon Manufacturer: Cypress
• Silicon Core Number: CY3280
• Kit Application Type: Sensing - Touch / Proximity
• Application Sub Type: Capacitive Touch
• Silicon Family Name: PSoC
• Rohs Compliant: Yes
• For Use With/related Products: CY8C20x34 and CY8C21x34
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 428-2033

Use the Board as Factory Programmed
Test the Board
Resetting the Board to the Original Factory Programming
8
2.3 From the Port menu, select MiniProg1/<Identification Code>.
2.4 Click Toggle Device Power
2.5 Touch the slider on the board with your finger. An LED will light up representing where your fin-
2.6 Touch one or more buttons with your finger. The LEDs light up corresponding to the buttons
Follow these steps if you wish to reset the board to the original factory installed programming:
2.7 Place shunts on pins 2 and 3 of J1 and pins 1 and 2 of J4.
2.8 The example projects are available on the CD and from the Cypress web site. On
2.9 To reset the board to the factory conditions, connect your computer to the CY3280-
2.10 Open PSoC Programmer by going to the Windows Start menu
2.11 Click File Load, navigate to, and open the CY3280_20x34_slm.hex file on the CD at:
2.12 From the Device Family menu, select 20x34.
2.13 From the Device menu, select CY8C20434-12LFXC.
2.14 Click Program. “Programming Succeeded...” appears in the Actions pane when programming
Note: The CY3280_20x34_slm example project is a PSoC Designer project, and will not open with
PSoC Express. PSoC Programmer uses .hex files generated by both applications.
green.
ger is on the slider. The LED state changes as you move your finger across the slider
being pressed.
www.cypress.com, search for CY3280-BK1.
20x34 board ISSP Connector (J3) using the PSoC MiniProg and a USB cable.
Cypress MicroSystems
Firmware/PSoCDesigner/CY8C20x34/CY3280_20x34_SLM/Output/CY3280_20x34_slm.hex
is complete.
CY3280-BK1 Universal CapSense Controller Quick Start, Doc. # 001-37959 Rev. **
PSoC Programming
. The D1 LED on the CY3280-20x34 board lights
PSoC Programmer
All Programs