C8051F411EK Silicon Laboratories Inc, C8051F411EK Datasheet - Page 8

• Manufacturer Part Number: C8051F411EK
• Description: KIT EVAL FOR C8051F411
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F411EK

• Contents: Evaluation Board, CD-ROM, USB Cable, Batteries and User Guide
• Processor To Be Evaluated: C8051F41x
• Interface Type: USB
• Silicon Manufacturer: Silicon Labs
• Core Architecture: 8051
• Silicon Core Number: C8051F411
• Silicon Family Name: C8051F41x
• Kit Contents: LCD Based Evaluation Board, USB Cable, Software CD And Quick-Start Guide
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: Silicon Laboratories C8051F41x
• For Use With: 336-1315 - KIT REF DESIGN VOICE RECORD F41X
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1317

C8051F411-EK
6.2.2. Building and Downloading the Program for Debugging
1. Once all source files have been added to the target build, build the project by clicking on the Build/MakeProject
2. Before connecting to the target device, several connection options may need to be set. Open theConnection
3. Click the Connect button in the toolbar or select Debug->Connect from the menu to connect to the device.
4. Download the project to the target by clicking the Download Code button in the toolbar.Note: To enable
5. Save the project when finished with the debug session to preserve the current target build configuration,editor
6.2.3. Downloading the C8051F411 Evaluation Board Demonstration Firmware
To download the demonstration code to the C8051F411 evaluation board, follow steps 2 and 3 in “6.2.2. Building
and
C:Silabs\MCU\Demos\C8051F411EK\F411EK_DEMO.hex by default.
8
button in the toolbar or selecting Project->Build/Make Project from the menu.Note: After the project has been
built the first time, the Build/Make Project command will only build the files that have been changed since the
previous build. To rebuild all files and project dependencies, click on the Rebuild All button in the toolbar or
select Project->Rebuild All from the menu.
Options window by selecting Options->Connection Options... in the IDE menu. First, selectthe adapter that was
included with the kit in the “Serial Adapter” section. Next, the correct “Debug Interface”must be selected.
C8051F41x family devices use the Silicon Labs 2-wire (C2) debug interface. Once all theselections are made,
click the OK button to close the window.
automatic downloading if the program build is successful select Enable automatic con-nect/download after build
in the Project->Target Build Configuration dialog. If errors occur during the build process, the IDE will not
attempt the download.
settings and the location of all open debug views. To save the project, select Project->Save ProjectAs... from
the menu. Create a new name for the project and click on Save.
Downloading
the
Program
for
Debugging”.
Rev. 0.1
The
demonstration
code
can
be
found
in