USB-ICP-80C51ISP Future Designs Inc, USB-ICP-80C51ISP Datasheet - Page 5

• Manufacturer Part Number: USB-ICP-80C51ISP
• Description: USB IN-CIRCUIT PROG 80C51ISP
• Manufacturer: Future Designs Inc
• Type: USB ICP (In-Circuit Programmer)r

Specifications of USB-ICP-80C51ISP

• Contents: USB-IC Dongle, 18" (457mm) Cable, Design Guide
• For Use With/related Products: Refer to Associated Part Links and Attached Parts List
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 622-1001

Using Flash Magic with USB-ICP to program P89C51/LV51/V51
Devices
USB-ICP-80C51ISP Quick Start Guide v2.doc
1) Plug the USB-ICP programmer into the USB port.
2) Make sure your target device IS powered and power will be supplied to the USB-
3) Plug the cable from the USB-ICP Programmer (RJ end with LEDs) to the target
4) Run Flash Magic v2.44 (or later) with the following settings:
ICP via pin 1 of the target interface cable.
device.
a. Section 1
b. Section 2
c. Section 3
d. Section 4
iii. Device: Choose target device processor type
ii. Baud Rate: 9600 (optimal for most crystal frequencies)
i. COM Port: Select COM port that matches installed USB-ICP
i. Click “Erase blocks used by Hex File”.
i. Click Browse and select HEX file to be programmed.
i. Make sure all checkboxes are NOT checked and especially in the
scrolling block sector area.
USB-ICP-80C51ISP
Quick Start Guide
Page 5 of 6
Rev 2