PCM16YL0 Microchip Technology, PCM16YL0 Datasheet - Page 54

• Manufacturer Part Number: PCM16YL0
• Description: PROCESSOR MODULE MPLAB-ICE 2000
• Manufacturer: Microchip Technology

Specifications of PCM16YL0

• Accessory Type: Processor Module
• Product: Microcontroller Modules
• Core Processor: PIC16F688
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: ICE2000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

MPLAB
HOW DO I ORDER MPLAB® ICE?
Ordering MPLAB® ICE is as easy as 1, 2, and 3!
NOTE 1: Choose your PICmicro® MCU.
A COMPLETE MPLAB® ICE SYSTEM
MPLAB® ICE is a modular emulator system with interchangeable components allowing the system to be easily
configured to emulate different PICmicro® MCUs. Since this emulator supports package-specific emulation,
customers need to know which device and package they intend to emulate. Then, the customer can use the Cross
Reference Parts List on the following pages to identify the part numbers required to complete an MPLAB® ICE
system. A complete system consists of:
NOTE 1: An emulator pod (including among other things the host-to-pod parallel cable and power supply)
MPLAB
MPLAB
Emulator Pod
Power Switch
(on back)
2: Choose your PICmicro® MCU package.
3: Find the right line on the next few pages
2: A processor module
3: A device adapter
4: A transition socket
Emulator Pod
®
for MPLAB® ICE part numbers. You’re ready to order.
®
®
ICE 2000 and MPLAB
ICE 2000 Emulator
ICE 4000 Emulator
Power
Device Adapter
Host-to-Pod
Indicator Lights
Logic Probe
Connector
Processor Module
®
ICE 4000 Emulator Systems
Processor Module
Transition Socket
Flex Circuit Cable
Device Adapter
Transition Socket
DEVELOPMENT SYSTEMS
An MPLAB® ICE emulator system is ordered as separate components. Knowing the terms will make it easy to
order and use the MPLAB® ICE emulator system. Read more about each component:
1. Emulator Pod
2. Processor Module
3. Device Adapter
4. Transition Socket
PRO MATE
The PRO MATE® II Programmer (DV007003) and the MPLAB® PM3 Programmer (DV007004) are Microchip’s
production rated programmers, which can be operated stand-alone or with a PC using MPLAB® IDE (included
free). They come complete with accessories needed to connect to a host system, including a power supply and
cables, giving the developer complete control over the programming session. Each programmer requires a socket
module (to be purchased separately), which can be selected from the following chart by identifying the devices for
programming and then picking the appropriate part number from their respective columns. In-Circuit Serial
Programming™ (ICSP™) can be added to the PRO MATE® II Programmer by ordering Socket Module
AC004004. MPLAB® PM3 has built-in ICSP™ programming capability.
In-Circuit Debuggers: MPLAB
MPLAB® ICD 2 is a low cost, flash-based development tool that connects between the PC and the designer’s
target board allowing direct in-circuit debugging of the PICmicro® target microcontroller. Programs can be
executed in real time or single step, watch variables established, break points set, memory read/writes
accomplished and more. The MPLAB® ICD 2 can also be used as a development programmer for the
microcontrollers.
The MPLAB® ICE 2000 and MPLAB® ICE 4000 are full-featured emulator pods containing a main board with
an additional board for expanded trace memory and complex control logic. The pods come with a standard
parallel interface cable that connects the pods to the parallel port of the PC and a power supply. MPLAB® ICE
4000 also includes a USB interface cable that connects the pod to the USB port.
The processor module is a PICmicro®, device-specific module that is inserted into the emulator pod. The
processor module contains the emulator chip, logic, and low-voltage circuitry. A flex cable extends from the
processor module and is connected to the device adapter at the target application.
The device adapter provides a common interface for the PICmicro® MCU being emulated. This adapter
contains a special device that provides an oscillator clock allowing the user to accurately emulate the RC
characteristics of the PICmicro® MCU. The device adapter provides emulation support for standard DIP and
PLCC styles. For emulation support of other packages, a transition socket is needed along with the device
adapter.
The transition sockets are available in various styles to allow the common device adapter to be translated to
support surface-mount packages, such as SOIC, SSOP, PQFP, TQFP and MLF.
®
II and MPLAB
PRO MATE® II
Socket Module
DV007003
®
PM3 Programmers
®
ICD 2
Systems Products
Development
DV007004
MPLAB® PM3
Socket Module
PAGE 52