CABLE-SMBUS-3PIN Analog Devices Inc, CABLE-SMBUS-3PIN Datasheet - Page 29

• Manufacturer Part Number: CABLE-SMBUS-3PIN
• Description: CABLE SMBUS 3PIN
• Manufacturer: Analog Devices Inc

Specifications of CABLE-SMBUS-3PIN

• Rohs Status: RoHS non-compliant
• Accessory Type: SMBus Cable
• For Use With/related Products: EVALADM106x Boards

Preliminary Technical Data
Once a state has been programmed, the user may wish to do a
number of things with it:-
Insert a State - Once clicked, a dialog box appears as shown in
figure 55 informing the user that a blank state will be inserted after
the highlighted state.
By pressing <Continue> a blank state will be inserted after the
highlighted state and a second window as shown in figure 56 will be
launched requesting that a State name is entered for the new state.
Figure 56. Rename state window
Once the new name has been entered click on <OK> The software
will check that the name entered is not a duplicate name of another
state. If it is a dialog box will appear as shown in figure 57.
Figure 57. Invalid state name dialog box
If a valid name has been entered the software will update the
Sequencing engine window. All subsequent states shuffle down,
maintaining their State names. For example, if a state was inserted
after state 0, State 1, although now the third state will still be called
Figure 55. Insert state dialog box
Rev. PrB | Page 29 of 38
State 1.
It must be noted that a state can not be inserted before the very
first state.
Rename a State - The State names can be altered to make them
more meaningful (e.g.) a state to check if a 3.3V supply is valid
could be called CHK_3.3V.
This function is very similar to the naming a new state as
described above. The only difference is that the user is not
forced into renaming the state because there is a cancel
function available as shown in figure 58. The renamed state can
be up to 10 characters long and all references to this state will
be updated automatically with the new name.
As with the rename state function described in the Insert state
section, once <OK> has been clicked the software will check
that the name entered is not a duplicate name of another state.
If it is a dialog box will appear as shown in figure 56. If a valid
name has been entered the software will update the Sequencing
engine window.
Reset State Names - This function will reset all the state
names to their default names i.e. State0 - State62
Copy/Paste a State - The SE functions copy and paste data
from one state to another.
The copy function will copy all the data of the highlighted
state.
The paste function will paste the data into the highlighted state
overwriting the data in that state. This function will not
overwrite the existing state name and may be used in more than
one state.
Delete a State- Because deleting a state may affect other states
(Due to it referring to other states, or other states referring to
it), a dialog box containing a report of the affected states as
shown in figure 59is generated by the software.
Figure 58 Rename state window with cancel function
EVAL-ADM106x