EVAL-ADT7461EBZ Analog Devices Inc, EVAL-ADT7461EBZ Datasheet - Page 7

• Manufacturer Part Number: EVAL-ADT7461EBZ
• Description: BOARD EVALUATION FOR ADT7461
• Manufacturer: Analog Devices Inc

Specifications of EVAL-ADT7461EBZ

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

CONTROL CENTER
The Control Center tab allows readings to be displayed graphi-
cally on bar graphs or line graphs.
Bar Graphs
At the bottom of the Control Center tab are bar graphs for the
local and remote sensors. These can be toggled on and off by
clicking the “Bargraphs are Off” button. The legend will change
to “Bargraphs are On” and clicking again will turn off the bar
graphs. The high and low temperature limits can be changed by
moving the pointer arrows below the bar graphs.
ADC Sampling Rate
The ADC sampling rate can be changed by rotating the control
knob next to the bar graphs.
REV. B
Figure 8. Example Line Graph
Figure 7. ADT7461 Evaluation Software Control Center Tab
–7–
Line Graphs
Line graphs of temperature against time can be plotted by click-
ing the “Graphing Stopped” button. The legend will change to
“Graphing Now” and clicking again will stop the graph.
While the graph is displayed on the screen, it is possible to zoom
in or out by moving the arrows on the temperature and time
axes. Moving the lower arrow up the temperature axis increases
the minimum temperature shown on the axis, while moving the
upper arrow down decreases the maximum temperature displayed,
thus zooming in on a narrower temperature range. Similarly,
moving the left arrow to the right on the time axis and/or the right
arrow to the left displays a narrower band of time on this axis.
Figure 9. Zoom in on Figure 8
EVAL-ADT7461