QV400D Quadravox Inc, QV400D Datasheet - Page 56

• Manufacturer Part Number: QV400D
• Description: CHIPCORDER PROTOTYPE TOOL KIT
• Manufacturer: Quadravox Inc
• Series: ChipCorder®r
• Type: Quadravox Prototyping Kitr

Specifications of QV400D

• Contents: Programmer Board with two empty ZIF Sockets, Cable, Power Supply, Software and Documentation
• For Use With/related Products: Winbond ChipCorder® Devices
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Chapter 6. Sample Project for QV400S & ISD chips
1999
Programming the Chip
We are now ready to program the chip. Make sure one more time that the power supply is
connected and that there is a valid ISD chip in the correct socket:
Make sure that the Project Window has the focus (click on its title bar if not), so that the Project
menu is available. The green LED should be on, indicating that the system is ready to accept
commands.
If the green LED marked “IDLE” is not on,
The green LED should now be on, and the red LED should be off. If the green LED is not on, your
system is not operational.
If the green LED is on:
Change the chip type in the combo box if it is not correct. Then, *START*. The 11 files contained in
the project will be programmed on the chip. Each file is highlighted in the main window as it is
being recorded. During the actual recording, the red LED comes on, and the green LED is off. The
green LED will blink in between recordings. It should stay on when the recording is over.
To listen to the files you just recorded:
Be sure that you have a speaker connected to the speaker output of the box (8 Ohm speaker), or
that your PC sound card speakers are connected to the MM (MultiMedia) speaker output of your
QV400D
In the main window, select all 11 files by clicking the left mouse button on the first file, then clicking
the left mouse button while holding the SHIFT key down on the last file. All 11 files should now be
highlighted in yellow.
The 11 files will be played one after the other, with a slight interval in between. They are highlighted
on the screen as they are being played.
Exit the program:
Only one of the two sockets can be occupied at a time. ISD100 - ISD2500 chips go into the
socket marked “ISD1000-ISD2500”, ISD 33000, 4002-XX, 4003-XX and 4004-XX go in the
socket marked “ISD33XXX-ISD4000”.
Quadravox, Inc
Quadravox, Inc
/Program/RESET/
/Program/Automatic/
/Sys Play.../ Selected File(s) in Project /
/Project.../Close//Project.../Exit/
.
QV400D User’s Guide
56