ZGP323ICE02ZEM Zilog, ZGP323ICE02ZEM Datasheet - Page 20
![EMULATOR ICE Z8 GP ZGP323](/photos/9/30/93049/zgp323ice02zem_sml.jpg)
ZGP323ICE02ZEM
Manufacturer Part Number
ZGP323ICE02ZEM
Description
EMULATOR ICE Z8 GP ZGP323
Manufacturer
Zilog
Series
Z8 OTPr
Type
In-Circuit Emulator Systemr
Specifications of ZGP323ICE02ZEM
Contents
Emulator Board, Cables, Software and Documentation
Processor To Be Evaluated
ZGP323
Interface Type
RS-232, Ethernet, USB
For Use With/related Products
ZGP323
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
269-3864
Page 20
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform
User Manual
9. If you do not want to pad the hex file, select the None button in the Pad File With area.
10. Click the Ram Checksum button to calculate the checksum of the data in emulator
11. Select which option bits to program in the Programming Option Bits area.
12. If you do not want a serial number loaded into the part, select the None button in the
13. Click Blank Check to verify that the OTP chip is actually blank.
14. Click the Burn button to program the OTP chip with the contents of emulator RAM.
15. When the burn is complete, click OTP checksum to calculate the checksum of data on
16. Click Close to close the OTP Programming window.
Burning Code from an Existing Hex File
To load an existing hex file into emulator RAM and burn an OTP:
1. Connect the OTP programming module to the emulator as described in “Connecting
2. Select the OTP chip you wish to burn and the appropriate package converter.
3. Install the package converter, if used, into the ZIF socket on the OTP programming
4. Install the OTP chip you wish to burn into the ZIF socket on the OTP programming
5. Stop any current debugging process by selecting Build --> Debug --> Stop Debug-
OTP Programming
Otherwise, select the FF, 00, or Other button. If you select the Other button, type the
hex value to pad the hex file with in the Other field.
RAM. Use this to compare with the OTP checksum after burning.
Method area. To load a serial number:
a. Select the Sequential or Pseudorandom button to determine how the serial number
b. Select the size of the serial number (1, 2, 3, or 4 bytes) in the Serial Number Size
c. Enter the starting serial number in the Serial Number field.
d. Enter the address into which you want the serial number loaded in the Address
As part of the Burn function, the OTP chip is also verified.
the OTP chip and compare it to the RAM checksum calculated earlier.
the Z8 GP ICE to the OTP Programming Module (Optional)” on page 4.
module.
adapter. Match pin 1 of the chip with pin one of the ZIF socket.
ging.
is incremented on subsequent burns.
area.
field.
UM019302-0407