ST7MDTU5-EMU2B STMicroelectronics, ST7MDTU5-EMU2B Datasheet - Page 53

• Manufacturer Part Number: ST7MDTU5-EMU2B
• Description: EMULATOR REAL TIME ST7
• Manufacturer: STMicroelectronics
• Series: ST7-EMU2Br
• Type: Microcontrollerr

Specifications of ST7MDTU5-EMU2B

• Contents: Main Emulation Board (MEB), Target Emulation Board (TEB), Cables, Power Supply and Documentation
• For Use With/related Products: ST7265x
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ST7MDTU5-EMU2B User Manual
4.5
Analyser probe input signals
The ST7 HDS2 allows you to use 4 external input signals (TTL level). These
signals are on pins 6,7,8,9 of the Analyser Probe connector located on the front
panel of the emulator as shown below.You can view these probe inputs using ST7
Visual Debug. From the main menu, select View>Trace. The input signal values
are listed under the Sig column (AL3..0).
ST7 Visual Debug’s Logical Analyser allows you to use these input signals to
define trace filtering or output trigger events. From the main menu, select
Tools>Logical Analyser to open the dialog box. A full description of how to use
this facility to control trace recording or trigger output signals is given in the ST7
Visual Debug online help.
A rainbow-colored cable will also be delivered to connect your application to these
inlets. Each red connector is to be connected to your signal. Each black connector
is to be connected to the reference ground for the signal.
Colors are attributed as follows:
•
•
•
•
AL0 is to be taken between the RED (signal) and BROWN (ground) wires
AL1 is to be taken between the YELLOW (signal) and ORANGE (ground)
wires.
AL2 is to be taken between the BLUE (signal) and GREEN (ground) wires.
AL3 is to be taken between the GREY (signal) and PURPLE (ground) wires.
Figure 27: Analyser probe connector
5
V
9
CC
AL3
4
AL2 AL1 AL0
8
3
7
2
6
1
GND
4 - Emulator Features
53/71