30006 Parallax Inc, 30006 Datasheet - Page 8

• Manufacturer Part Number: 30006
• Description: MODULE EMIC TTS SIP FEMALE
• Manufacturer: Parallax Inc

Specifications of 30006

• Module/board Type: Text-to-Speech SIP Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: Parallax microcontroller
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

When an abbreviation is successfully added, the Emic Platform performs a "soft reset", which resets the volume,
speed, and pitch settings to their default values. Refer to the section on Abbreviations for details.
Delete abbreviation:
This command deletes a user-specified abbreviation from the abbreviation table stored on the Emic Platform. The
abbreviation to be deleted, abbr, is passed along with the command. Even if a non-existent abbreviation is passed
with the command, the Emic Platform will respond with "OK" or a single 0x55 byte depending on the ASCII or
hexadecimal mode of the Emic Platform. After an abbreviation entry is deleted, the entry is removed from the
abbreviation table and not used. However, the entry still takes up space in the internal memory of the Emic Platform.
When an abbreviation is successfully deleted, the Emic Platform performs a "soft reset", which resets the volume,
speed, and pitch settings to their default values. Refer to the section on Abbreviations for details.
List abbreviations:
This command returns the valid abbreviation table stored on the Emic Platform. Refer to the section on Abbreviations
for details. Example response from the Emic Platform:
If the Emic Platform is in hexadecimal mode, the "Abbreviation List =" header will not be transmitted and a single
0x0A byte will be used to separate all table entries instead of a new line and carriage return. At the end of the table
listing or if no abbreviation entries exist, the Emic Platform will respond with "OK" or a single 0x55 byte depending on
the ASCII or hexadecimal mode of the Emic Platform.
Emic and WTS701 version numbers:
This command returns the hardware and firmware version numbers of the Emic Platform and the core Winbond
WTS701 Single-Chip Text-to-Speech Processor. For diagnostics and troubleshooting only. Example response from
the Emic Platform:
If the Emic Platform is in hexadecimal mode, the headers will not be transmitted and only the four byte values will be
sent. At the end of the version listing, the Emic Platform will respond with "OK" or a single 0x55 byte depending on
the ASCII or hexadecimal mode of the Emic Platform.
8
Command example: Convert SMS/Instant Message abbreviation into understandable word, ":)" into "happy"
Command example: Delete the ":)" abbreviation from the abbreviation list
Abbreviation List =
:)
happy
TTS
text to speech
Emic HWREV = 1A
Emic SWREV = 12
WTS701 HWVER = 02
WTS701 SWVER = 68
To Emic Platform
From Emic Platform
To Emic Platform
From Emic Platform
ASCII
addabbr=:),happy;
OK
ASCII
delabbr=:);
OK
Parallax, Inc. • Emic Text-To-Speech Module (#30006) • 02/2005
Hexadecimal
0x04, 0x3A, 0x29, 0x2C, 0x68, 0x61,
0x70, 0x70, 0x79, 0xAA
0x55
Hexadecimal
0x05, 0x3A, 0x29, 0xAA
0x55