COP8-PGMA-DS44P National Semiconductor, COP8-PGMA-DS44P Datasheet - Page 25

• Manufacturer Part Number: COP8-PGMA-DS44P
• Description: PGMR ADAPTER/COP8 DIP,SOIC,PLCC
• Manufacturer: National Semiconductor

Specifications of COP8-PGMA-DS44P

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: *COP8-PGMA-DS44P

Development Support
iceMASTER EVALUATION PROGRAMMING UNIT (EPU)
The iceMASTER EPU-COP880C is a PC based, in-circuit
simulation tool to support the feature family COP8 products.
See Figure 14 for configuration.
The simulation capability is a very low cost means of evalu-
ating the general COP8 architecture. In addition, the EPU
has programming capability, with added adapters, for pro-
gramming the whole COP8 product family of OTP and
EPROM products. The product includes the following fea-
tures:
• Non-real-time in-circuit simulation. Program overlay
• Includes a 40 pin DIP cable adapter. Other target pack-
• Full 32 kbyte of loadable programmable space that over-
• On-chip timer and WATCHDOG execution are not well
• 100 frames of synchronous trace memory. The display
• Up to eight software configured break points; uses INTR
• Common look-feel debugger software across all Met-
memory is PC resident; instructions are downloaded over
RS-232 as executed. Approximate performance is
20 kHz.
ages are not supported. All processor I/O pins are cabled
to the application development environment.
lays (replaces) the on-chip ROM or EPROM. On-chip
RAM and I/O blocks are used directly or recreated as
necessary.
synchronized to the instruction simulation.
can be HLL source (e.g., C source), assembly or mixed.
The most recent history prior to a break is available in the
trace memory.
instruction which is modestly intrusive.
aLink products — only supported features are selectable.
(Continued)
FIGURE 14. EPU-COP8 Tool Environment
25
EPU Order Information
• Tool
• Instruction by instruction memory/register changes dis-
• Processor specific symbolic display of registers and bit
• Halt/Idle mode notification. Restart requires special han-
• Programming menu supports full product line of program-
• Integral wall mount power supply provides 5V and devel-
• Includes a copy of COP8-DEV-IBMA assembler, linker
Evaluation Programming Unit
EPU-COP880C
General Programming Adapters
COP8-PGMA-DS
COP8-PGMA-DS44P 28 and 20 DIP and SOIC plus 44
debugger — supports both assembler (COFF) and C
Compiler (.COD) SDK linked object formats.
played when in single step operation.
level assignments, configured from master model file.
dling.
mable OTP and EPROM COP8 products. Only a 40 ZIF
socket is available on the EPU unit. Adapters are avail-
able for other part package configurations.
ops the required V
SDK.
set
integrated
PP
Evaluation Programming Unit
with debugger and programmer
control software with 40 ZIF
programming socket.
28 and 20 DIP and SOIC adapter
PLCC adapter
to program parts.
interactive
www.national.com
DS010802-26
symbolic