DS16EV5110-EVKD National Semiconductor, DS16EV5110-EVKD Datasheet - Page 3

• Manufacturer Part Number: DS16EV5110-EVKD
• Description: BOARD EVALUATION DS16EV5110D
• Manufacturer: National Semiconductor
• Type: Video Equalizerr

Specifications of DS16EV5110-EVKD

• Contents: Evaluation Board
• For Use With/related Products: DS16EV5110D
• For Use With: DS16EV5110-EVKD - BOARD EVALUATION DS16EV5110D
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Quick Start Guide:
Adjustment and Control Description
DS16EV5110-EVKD User Guide Rev B
April 2007
© National Semiconductor Corporation
1.
2.
3.
Component
J10, J11
Connect 3.3V DC power to J4 and ground to J5 from the power supply.
Or, plug the AC/DC power adapter to the DC power Jack
AC/DC power adapter requirement: Output DC 4V~6V, Output current > 800mA
Attach two HDMI cables to the HDMI Input and Output Connectors
Turn on the DVD/Computer and the Monitor/HDTV.
D1
D2
U3
J3
J4
J5
J7
J8
J9
Rotary Switch
SDA, SDC
Loop Back
Control
5V DC
Name
PWR
GND
3.3V
FEB
SD
CS
The LED turns on when 5V DC applies
The LED turns on when the DS16EV5110 does not detect clock signal
Optional DC Power Jack for 1.5 mm Adaptor Plug
3.3V VCC power supply
GND
Optional SMBus Control. See Datasheet.
Optional SMBus Control. See Datasheet
Optional SMBus access. See Datasheet
Connect “LED” and “SD” to enable D2 function.
Connect “SD” and “EN” to enable look back control function. When the clock
signal is not detected, the DS16EV5110 sets to power down mode.
Turn the switch to control the EQ boost setting. “0” on the switch refers to the
boost setting of “0X00”, “7” on the switch refers to the boost setting of “0X07”.
See datasheet for detail Boost setting information.
Function