SUPERPRO 500P Xeltek, SUPERPRO 500P Datasheet - Page 44

• Manufacturer Part Number: SUPERPRO 500P
• Description: PROGRAMMER UNIVERSAL 48-PIN
• Manufacturer: Xeltek
• Series: SuperPro 500Pr
• Type: Universal, Stand Aloner

Specifications of SUPERPRO 500P

• Contents: Programmer with 48-Pin DIP Socket, AC Adapter, Software CD, USB Cable, Users Manual
• Ic Product Type: Programmer, Universal
• Ic Interface Type: USB
• No. Of Devices Supported: 22462
• Kit Contents: SuperPro 500P Programmer, AC Adapter, CD
• Rohs Compliant: Yes
• For Use With/related Products: E/EPROM, FLASH, PLD, Micros and more listed on Device Sheet, 21,000+ Devices Supported
• For Use With: 415-1029 - SOCKET ADAPTER FOR SDIP42415-1028 - SOCKET ADAPTER FOR TQFP32415-1027 - SOCKET ADAPTER FOR TSOP56415-1025 - SOCKET ADAPTER FOR SOIC20415-1024 - SOCKET ADAPTER FOR TSOP40415-1023 - SOCKET ADAPTER FOR SOP44415-1022 - SOCKET ADAPTER FOR TSOP56415-1019 - SOCKET ADAPTER FOR SOIC16/SOIC8415-1018 - SOCKET ADAPTER FOR SOIC28415-1015 - SOCKET ADAPTER FOR PLCC28415-1014 - SOCKET ADAPTER FOR PLCC20415-1013 - SOCKET ADAPTER FOR PLCC32415-1017 - SOCKET ADAPTER FOR PLCC44
• Lead Free Status / RoHS Status: Lead free by exemption / RoHS compliant by exemption
• Other names: 415-1047; SP500P

Example: There are 64 chips with IDs from 0001 to 0064, which are in the end
To define the increase of the serial number, select User’s Definition. You must be
authorized to use this function. If so, you can change the data as desired in the 4K
byte range.
Superpro
®
5000 User’s Guide
address of 89C51 EPROM. The selected mode is 4 bytes, using the
decimal system.
In the Buffer Edit window, make the following change:
FFC:
The Operation Information window displays the following
information during programming:
Current AutoIncrement Data=0001
In subsequent programming operations, the information in the last 4
bytes of the buffer data is:
FFC:
After successful programming, the AutoIncrement value increases
by 1. The Operation Information window displays the following
information:
Current AutoIncrement Data = 0002
The last 4 bytes of the buffer data are:
FFC:
1. Enter FFF in the Start Address field.
2. Enter FFC in the End Address field.
3. Enter 1 in the Inc.Step field.
4. Select ASCII Decimal as the AutoInc. Format.
30
30
30
FFD:
FFD:
FFD:
30
30
30
FFE: 30
FFE: 30
FFE: 30
FFF: 31
FFF: 31
FFF: 32
44