FS-9017 Digi International, FS-9017 Datasheet - Page 10

• Manufacturer Part Number: FS-9017
• Description: JTAG-BOOSTER FOR PPC405XXX 3.3V
• Manufacturer: Digi International
• Series: Digi/FS Forthr
• Type: FLASHr

Specifications of FS-9017

• Contents: Programmer and Associated Interface Software
• For Use With/related Products: IBM PPC405xxx, 3.3V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10) A Flash STM 29W320B selected with PER_CS0# was found.
(11) The resulting data bus size is printed here.
(12) In this example 4 blocks must be erased.
10
The initialization file JT405EP.INI was found in the current directory.
The target identification line of the initialization file is printed here.
The resulting I/O-address of the parallel port is printed here. With
WinNT/Win2000/WinXP you must specify the option /LPT2 to access to
the standard address 378h.
A JTAG-Booster is found on the parallel port
The JTAG chain is analyzed. There may be several parts in the JTAG
chain. The chain is analyzed and all parts except the IBM PPC405EP are
switched to bypass mode.
The length of all instruction registers in the JTAG chain are added.
The position of the IBM PPC405EP in the JTAG chain is assumed to be
zero, if not specified in the command line (see option /CPUPOS=).
The position of the JTAG instruction register of the IBM PPC405EP is
assumed to be zero, if not specified in the command line (see option
/IROFFS=).
The real length of the boundary scan register is displayed here and
compared with the boundary scan register length of a IBM PPC405EP.
JTAG_PPC405a.doc