G32A-A420-VD DC12-24 Omron, G32A-A420-VD DC12-24 Datasheet - Page 7

• Manufacturer Part Number: G32A-A420-VD DC12-24
• Description: CARTRIDGE POWER DEVICE FOR G3PA
• Manufacturer: Omron
• Series: G3PAr

Specifications of G32A-A420-VD DC12-24

• Accessory Type: Power Device Cartridge
• Control Voltage Range: 12 V to 24 V
• Load Voltage Rating: 400 V
• Load Current Rating: 20 A
• Mounting Style: DIN Rail
• Termination Style: Screw
• For Use With/related Products: G3PA Series
• For Use With: G3PA-420B-VDDC12-24 - RELAY SSR PHASE 200-480VAC 20A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: G32A-A420-VDDC12-24; G32AA420VDDC1224

3. Insert the cartridge into the opening of the G3PA so that side A
■ Linking Terminal Connection
• Connecting with linking terminal for G3PA-210B(L)-VD, -220B(L)-
VD, -240B(L)-VD and G3PA-420B-VD(-2), G3PA-430B-VD(-2).
and side B are even.
1. When SSRs are close
mounted, loosen the
M3.5 Sems screw and
flip the linking terminal
down.
SSR1
When the temperature indicator has turned from pink to red, the G32-A-A Power Device Cartridge
may have malfunctioned, in which case the cartridge must be replaced with a new one.
Connect the terminal with power off.
Refer to the instruction manual for
the G32A-A Power Device Cartridge
to replace the G3PA's triac part.
SSR2
Linking terminal
Linking terminal
2. Insert the linking
Side A
Side B
terminal securely
into the center of
the screw and
tighten the screw.
SSR1
SSR2
4. Tighten the screws on both the corners with a tightening torque of
5. Tighten the screws on both the sides with a tightening torque of
6. Attach the terminal cover.
7. Switch on the power and check the G3PA to be sure it works
• Connecting with linking terminal for G32A.
0.59 to 0.78 N·m.
0.59 to 0.78 N·m.
properly.
1. When SSR are close
SSR
G3PA-420B-VD
mounted, loosen the
M3.5 Sems screw on
the G32A and flip the
linking terminal down.
G32A Unit
Use the terminal cover to prevent accidents
due to electric shock.
Linking
terminal
Linking
terminal
* The cover will not fit if
2. Insert the linking terminal
SSR
the terminal protrudes.
securely into the center
of the screw and tighten
the screw. Ensure that
the linking terminal does
not protrude.
G32A Unit
G3PA
*
7