DSP2A-DC12V Panasonic Electric Works, DSP2A-DC12V Datasheet - Page 3

• Manufacturer Part Number: DSP2A-DC12V
• Description: RELAY MINI DPST 5A 12VDC PC MNT
• Manufacturer: Panasonic Electric Works
• Series: DSPr
• Type: Power Relayr

Specifications of DSP2A-DC12V

• Relay Type: General Purpose
• Contact Form: DPST (2 Form A)
• Contact Rating (current): 5A
• Switching Voltage: 250VAC
• Coil Type: Standard
• Coil Current: 25mA
• Coil Voltage: 12VDC
• Turn On Voltage (max): 9.6 VDC
• Turn Off Voltage (min): 1.2 VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Circuit: DPST (2 Form A)
• Contact Rating @ Voltage: 5A @ 250VAC
• Control On Voltage (max): 9.6 VDC
• Control Off Voltage (min): 1.2 VDC
• Brand/series: DS-P Series
• Current, Rating: 5 A
• Diameter, Mounting: 0.47 in. Dia. (Hole)
• Dimensions: 0.795 in. L x 0.433 in. W x 0.413 in. H
• Function: Power
• Latch Type: Single Side Stable
• Material, Contact: Gold Flash Over Silver Alloy
• Number Of Pins: 6
• Standards: UL, CSA, TUV
• Termination: Solder
• Voltage, Control: 12 VDC
• Voltage, Rating: 380 VAC
• High Switching Capacity: 1a
• High Sensitivity: 190 mW pick-up power
• Relay Construction: Non-Latching
• Contact Arrangement: DPST-NO
• Coil Voltage Dc: 12V
• Voltage Rating (vdc): 30V
• Voltage Rating (vac): 250V
• Dropout Volt (min): 1.2VDCV
• Coil Resistance: 480Ohm
• Pick-up Voltage (max): 9.6VDC
• Maximum Power Rating: 150W/1.25KVA
• Operate Time: 10ms
• Contact Current Rating: 5A
• Contact Material: AgSnO2/Au Flash
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Sealed
• Product Height (mm): 10.5mm
• Product Depth (mm): 11mm
• Product Length (mm): 20.2mm
• Operating Temp Range: -40C to 60C
• Pin Count: 6
• Mounting Style: Through Hole
• Package / Case: DIP
• Lead Free Status / RoHS Status: Lead free / RoHS non-compliant
• Other names: 255-1053; DSP2AE-DC12V

2. Specifications
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
REFERENCE DATA
1. Max. switching capacity
3.-(1) Coil temperature rise (1 Form A)
Tested sample: DSP1a-DC12V, 5 pcs.
Contact
Rating
Electrical
characteristics
Mechanical
characteristics
Expected life
Conditions
Unit weight
Characteristics
0.1
60
50
40
30
20
10
10
1
*2. Wave is standard shock voltage of 1.2 50 s according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
0
10
DC resistive
load (1a)
DC resistive load
(1a1b,2a)
actual load.
conditions in NOTES.
80
Coil applied voltage, %V
Arrangement
Contact resistance (Initial)
Contact material
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Nominal operating power
Min. switching capacity (Reference value)*
Insulation resistance (Initial)
Breakdown voltage
(Initial)
Surge breakdown
voltage*
Temperature rise (coil) (at 65 C
Operate time [Set time] (at 20 C
Release time [Reset time] (at 20 C
Shock resistance
Vibration resistance
Mechanical
Electrical
Conditions for operation, transport and storage*
(Not freezing and condensing at low temperature)
Solder heating
Max. operating speed
Contact voltage, V
AC resistive
(1a1b,2a)
100
100
load
2
AC resistive
load (1a)
120
8A
0A
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
1000
Between open contacts
Between contact sets
Between contact and coil
between contacts and coil
Functional
Destructive
Functional
Destructive
Item
149
68
68
2.-(1) Life curve (1 Form A 1 Form B)
3.-(2) Coil temperature rise
(1 Form A 1 Form B)
Tested sample: DSP1-DC12V, 5 pcs.
F)
F)
F)
100
10
1
60
50
40
30
20
10
0
0
265 V·130 V AC
3
cos = 0.4
1
80
2
Min. 1,000M (at 500V DC) Measurement at same location as “Breakdown voltage” section.
Max. 10 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 5 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
8 A 250 V AC, 5A 30V DC
Coil applied voltage, %V
Switching capacity, A
Ambient temperature:
3
265 V·130 V AC cos = 1
2,000 VA, 150 W
–40 F to +140 F
–40 C to +60 C
8 A AC, 5 A DC
100
Min. 196 m/s
Max. 55 C
1 Form A
4
2,000 Vrms (1 Form A 1 Form B, 2 Form A) (Detection current: 10mA.)
10 to 55 Hz at double amplitude of 2 mm (Detection time: 10 s.)
5
250 C
Min. 980 m/s
120
6
2
1,000 Vrms for 1min. (Detection current: 10mA.)
3,000 Vrms for 1min. (Detection current: 10mA.)
(Half-wave pulse of sine wave: 11 ms; detection time: 10 s.)
5A
0A
10 to 55 Hz at double amplitude of 3.5 mm
482 F
Max. 30 m (By voltage drop 6 V DC 1A)
7
(Soldering depth: 2/3 terminal pitch)
Min. 5 10
(10s), 300 C
2
Au-flashed AgSnO
Min. 10
(Half-wave pulse of sine wave: 6 ms.)
Ambient temperature:
380 V AC, 125 V DC
Approx. 4.5 g
1 Form A 1 Form B
–40 F to +149 F
–40 C to +65 C
(without diode)
10m A 5 V DC
Specifications
2.-(2) Life curve (1 Form A 1 Form B)
3.-(3) Coil temperature rise (2 Form A)
Tested sample: DSP2a-DC12V, 5 pcs.
Max. 40 C
7
5
300 mW
5,000 V
(at 180 times/min.)
(resistive load)
3 cps
100
572 F
50
10
60
50
40
30
20
10
0
5 A 250 V AC, 5 A 30 V DC
.16 oz
(5s), 350 C
2
30 V DC L/R = 7 ms
1,250 VA, 150 W
type
80
5 A AC, DC
0.5
Coil applied voltage, %V
Switching capacity, A
662 F
Ambient temperature:
100
1
–40 F to +140 F
–40 C to +60 C
(3s)
Max. 55 C
2 Form A
30 V DC resistive
5
120
5A
0A
DSP
10