HE2AN-DC24V Panasonic Electric Works, HE2AN-DC24V Datasheet - Page 4

• Manufacturer Part Number: HE2AN-DC24V
• Description: RELAY POWER 25A 24VDC PLUG-IN
• Manufacturer: Panasonic Electric Works
• Series: HEr
• Type: Power Relayr

Specifications of HE2AN-DC24V

• Relay Type: General Purpose
• Contact Form: DPST (2 Form A)
• Contact Rating (current): 25A
• Switching Voltage: 277VAC
• Coil Type: Standard
• Coil Current: 80mA
• Coil Voltage: 24VDC
• Turn On Voltage (max): 16.8 VDC
• Turn Off Voltage (min): 2.4 VDC
• Mounting Type: Chassis Mount
• Termination Style: Quick Connect - .250" (6.3mm)
• Circuit: DPST (2 Form A)
• Contact Rating @ Voltage: 25A @ 277VAC
• Control On Voltage (max): 16.8 VDC
• Control Off Voltage (min): 2.4 VDC
• Brand/series: HE Series
• Current, Rating: 25 A
• Function: Power
• Latch Type: Single Side Stable
• Power, Rating: 8310 VA
• Standards: UL, CSA, VDE, TUV
• Termination: Plug-In
• Voltage, Control: 24 VDC
• Voltage, Rating: 277 VAC
• Relay Construction: Non-Latching
• Contact Arrangement: DPST-NO
• Coil Voltage Dc: 24V
• Voltage Rating (vdc): 30V
• Voltage Rating (vac): 277V
• Dropout Volt (min): 2.4VDCV
• Coil Resistance: 300Ohm
• Pick-up Voltage (max): 16.8VDC
• Maximum Power Rating: 6.925KVA
• Operate Time: 30ms
• Contact Current Rating: 25A
• Contact Material: Ag
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Unsealed
• Product Height (mm): 46.2mm
• Product Depth (mm): 33mm
• Product Length (mm): 50mm
• Operating Temp Range: -50C to 55C
• Pin Count: 6
• Mounting Style: Plug-In
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 255-1660

HE
2. Specifications
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
REFERENCE DATA
1 Form A Type
1. Maximum switching power
Contact
Rating
Electrical
characteristics
Mechanical
characteristics
Expected life
Conditions
Unit weight
Characteristics
100
*2 Wave is standard shock voltage of 1.2 50 s according to JEC-212-1981
*3 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.
0.5
50
30
20
10
5
1
actual load.
DC resistive
30
Arrangement
Initial contact resistance, max
Contact material
Nominal switching capacity (resistive load)
Max. switching power
Max. switching voltage
Max. switching current
Nominal operating power
Min. switching capacity (Reference value)*
Insulation resistance (Initial)
Breakdown voltage
(Initial)
Surge breakdown voltage*
(between contact and coil)
Temperature rise
Operate time (at nominal voltage)
Release time (at nominal voltage)
Shock resistance
Vibration resistance
Mechanical
Electrical (resistive load) (at 20 cpm)
Conditions for operation, transport and storage*
Conditions for operation, transport and storage*
Contact voltage, V
100
AC resistive
500 1,000
Between open contacts
Between contact sets
Between contact and coil
Functional
Destructive
Functional
Destructive
Item
2
2. Life curve
1
1,000
500
100
3
3
50
10
5
0
1 Form A
100mA 5V DC
Min. 1,000M
Measurement at same location as “Initial breakdown voltage” section.
Min. 10,000V (initial)
DC: Max.10ms (excluding contact bounce time, without diode),
AC: Max. 30ms (excluding contact bounce time)
10 to 55 Hz at double amplitude of 1 mm (Detection time: 10 s.)
DC: Min. 10
Min. 10
Min. 2 10
Ambient temperature: –50 C to +55 C
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature),
Air pressure: 86 to 106kPa
20 cpm (at max. rating)
PC board type: approx. 80g 2.82oz, Plug-in type/TM type: approx. 90g 3.17oz,
Screw terminal type: approx. 120g
Max. 100 m (By voltage drop 6 V DC 1A)
AgSnO
30A 277V AC
8,310VA
277V AC, 30V DC
30A
DC: 1.92W, AC: 1.7 to 2.7VA
2,000 Vrms for 1min (Detection current: 10mA.)
—
5,000 Vrms for 1min (Detection current: 10mA.)
DC: Max. 60 C (at 55 C) (By resistive method), AC: Max. 65 C (at 55 C) (By resistive method)
Max. 30ms (excluding contact bounce time)
Min. 98 m/s
Min. 980 m/s
10 to 55 Hz at double amplitude of 1.5 mm
5
10
2
5
type
(30A 277V AC)
5
(30A 250V AC)
2
7
15
Contact current, A
(Half-wave pulse of sine wave: 11 ms; detection time: 10 s.)
2
(at 180 cpm), AC: Min. 5 10
(Half-wave pulse of sine wave: 6 ms.)
(at 500V DC)
250 V AC resistive
30 V DC resistive
20
25
30
35
4.23oz
–58 F to +131 F
6
Specifications
(at 180 cpm)
3. Coil temperature rise (DC type)
Measured portion: Inside the coil
Contact current: 30 A
Min. 10
Min. 2 10
2 Form A
25A 277V AC
6,925VA
25A
4,000 Vrms for 1min (Detection current: 10mA.)
60
50
40
30
20
10
70
0
5
20 C
40 C
60 C
(25A 277V AC)
5
(20A 250V AC)
100
Coil applied voltage, %V
110
120