G6L-1F-DC4.5 Omron, G6L-1F-DC4.5 Datasheet - Page 7

• Manufacturer Part Number: G6L-1F-DC4.5
• Description: RELAY TELCOM SPST 4.5VDC SMT
• Manufacturer: Omron
• Series: G6Lr

Specifications of G6L-1F-DC4.5

• Coil Type: Standard
• Coil Current: 40mA
• Relay Type: Telecom
• Circuit: SPST-NO (1 Form A)
• Contact Rating @ Voltage: 1A @ 24VDC
• Coil Voltage: 4.5VDC
• Control On Voltage (max): 3.38 VDC
• Control Off Voltage (min): 0.45 VDC
• Mounting Type: Surface Mount
• Termination Style: Gull Wing
• Contact Form: 1 Form C
• Power Consumption: 180 mW
• Maximum Switching Current: 1 A
• Contact Rating: 0.3 A at 125 VAC, 1 A at 24 VDC
• Contact Configuration: SPST-NO
• Contact Current Max: 1A
• Contact Voltage Ac Nom: 125V
• Contact Voltage Dc Nom: 24V
• Coil Voltage Vdc Nom: 4.5V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: G6L1FDC4.5; G6L1FDC45; Z1231

Recommended Soldering Method
■ Temperature Profile According to IRS
When performing reflow-soldering, check the profile on an actual
device after setting the temperature condition so that the tempera-
tures at the relay terminals and the upper surface of the case do not
exceed the limits specified in the following tables.
Mounting Solder: Lead Based
Mounting Solder: Lead-free
■ Approved Standards
UL Recognized (File No. E41515) / CSA Certified (File No. LR31928) - - Ambient Temp. = 40°C
Measuring
position
Terminal
Upper surface
of case
Measuring
position
Terminal
Upper surface
of case
SPST-NO
Contact form
Item
Item
T4
T3
T2
T1
150°C to 180°C,
120 s max.
——
150°C to 180°C,
120 s max.
——
(T1 to T2, t
(T1 to T2, t
Preheating
Preheating
G6L-1P and G6L-1F: 3 to 24 VDC
1
1
)
)
Preheating
180°C to 200°C,
20 to 30 s
——
230°C,
30 s max.
——
t
1
Soldering
Soldering
(T3, t
(T3, t
Soldering
2
2
)
)
Coil rating
t
2
Time (s)
245°C max.
250°C max.
250°C max.
255°C max.
Peak value
Peak value
(T4)
(T4)
1A at 30 VDC (Resistive)
0.5A at 60 VDC (Resistive)
0.3A at 125 VAC (General Use)
The thickness of cream solder to be applied should be within a range
between 150 and 200 μm on OMRON's recommended PCB pattern.
Visually check that the Relay is properly soldered.
PCB
Correct Soldering
Contact rating
Terminal
Relay
Solder
Land
Low Signal Relay
Incorrect Soldering
6,000
Number of test operations
Insufficient
amount of
solder
G6L
Excessive
amount of
solder
43