G6AK-234P-ST-US-DC5 Omron, G6AK-234P-ST-US-DC5 Datasheet - Page 19

• Manufacturer Part Number: G6AK-234P-ST-US-DC5
• Description: RELAY PC MNT DPDT 1A 5VDC
• Manufacturer: Omron
• Series: G6Ar

Specifications of G6AK-234P-ST-US-DC5

• Coil Type: Latching, Dual Coil
• Coil Current: 36mA
• Relay Type: General Purpose
• Circuit: DPDT (2 Form C)
• Contact Rating @ Voltage: 1A @ 30VDC
• Coil Voltage: 5VDC
• Control On Voltage (max): 3.5 VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Contact Configuration: DPDT
• Contact Current Max: 2A
• Contact Voltage Ac Nom: 125V
• Contact Voltage Dc Nom: 30V
• Coil Voltage Vdc Nom: 5V
• Coil Resistance: 139ohm
• Contact Form: 2 Form C
• Power Consumption: 180 mW
• Maximum Switching Current: 2 A
• Contact Rating: 0.30 A at 125 VAC, 1 A at 30 VDC
• Current, Rating: 0.3⁄1 AAC⁄ADC
• Function: Latching
• Number Of Pins: 10
• Power, Rating: 125⁄60 VA⁄W
• Standards: UL, CSA
• Termination: Solder
• Voltage, Control: 5 VDC
• Voltage, Rating: 125 VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Control Off Voltage (min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: G6AK234PSTUSDC5; Z749

G2R
Precautions
I
When mounting a number of relays on a PCB, be sure to provide
a minimum mounting space of 5 mm between the two juxtaposed
relays as shown below.
Cat. No. K013-E1-11B
5 mm min.
Mounting
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
5 mm min.
The above minimum mounting space is necessary due to mutual
thermal interference generated by the relays. This restriction may
be ignored, however, depending on the operating conditions of
the relays. Consult OMRON for details.
There is no restriction on the mounting direction of each relay on
the PCB.
When using this circuit, confirm the set and reset states and then
take into account the circuit constant.
G2R
19