G6Z-1FE-A DC4.5 Omron, G6Z-1FE-A DC4.5 Datasheet - Page 16

• Manufacturer Part Number: G6Z-1FE-A DC4.5
• Description: RELAY HI FREQ 50 OHM SMD
• Manufacturer: Omron
• Series: G6Zr

Specifications of G6Z-1FE-A DC4.5

• Relay Type: RF
• Circuit: SPDT (1 Form C)
• Contact Rating @ Voltage: 0.01A @ 30VAC/DC
• Coil Type: Standard
• Coil Current: 44.4mA
• Coil Voltage: 4.5VDC
• Control On Voltage (max): 3.38 VDC
• Control Off Voltage (min): 0.45 VDC
• Mounting Type: Surface Mount
• Termination Style: Gull Wing
• Coil Frequency Max: 2.6GHz
• Coil Voltage Vdc Nom: 4.5V
• Contact Current Max: 500mA
• Contact Voltage Ac Nom: 30V
• Contact Voltage Dc Nom: 30V
• Coil Resistance: 101ohm
• Contact Configuration: SPDT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: G6Z-1FE-ADC4.5; G6Z1FEADC4.5; G6Z1FEADC45

G6Z
Claw Securing Force During Automatic
Mounting
During automatic insertion of Relays, be sure to set the securing
force of each claw to the following so that the Relay’s characteris-
tics will be maintained.
Cat. No. K124-E1-02
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Secure the claws to the shaded area.
Do not attach them to the center area
or to only part of the Relay.
C
B
Direction A: 4.90 N max.
Direction B: 4.90 N max.
Direction C: 4.90 N max.
Latching Relay Mounting
Make sure that the vibration or shock that is generated from other
devices, such as Relays, on the same panel or substrate and
imposed on the Latching Relay does not exceed the rated value,
otherwise the set/reset status of the Latching Relay may be
changed. The Latching Relay is reset before shipping. If exces-
sive vibration or shock is imposed, however, the Latching Relay
may be set accidentally. Be sure to apply a reset signal before
use.
Coating
Do not use silicone coating to coat the Relay when it is mounted
to the PCB. Do not wash the PCB after the Relay is mounted
using detergent containing silicone. Otherwise, the detergent may
remain on the surface of the Relay.
G6Z
133