AQ2A1-C2-ZT24VDC Panasonic Electric Works, AQ2A1-C2-ZT24VDC Datasheet - Page 7

• Manufacturer Part Number: AQ2A1-C2-ZT24VDC
• Description: SSR 2A 125VAC 24VDC ZERO-CROSS
• Manufacturer: Panasonic Electric Works
• Series: AQ8r

Specifications of AQ2A1-C2-ZT24VDC

• Circuit: SPST-NO (1 Form A)
• Output Type: AC, Zero Cross
• Load Current: 2A
• Voltage - Input: 21.6 ~ 26.4VDC
• Voltage - Load: 75 ~ 125 V
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Package / Case: 4-SIP
• Input Type: DC
• Input Voltage (max): 26.4V
• Output Voltage (max): 125V
• Output Current: 2A
• Isolation Voltage: 3kV
• Output Device: Triac
• Pin Count: 4
• Mounting: Through Hole
• Operating Temp Range: -30C to 80C
• Operating Temperature Classification: Commercial
• Rad Hardened: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• On-state Resistance: -
• Lead Free Status / Rohs Status: Compliant

AQ8
NOTE
1. When used for the load less than
rated
In case of the load current less than
rated, malfunction may result from the
residual voltage across the both ends of
the load even if the solid state relay is
turned off. Use a dummy resistor as a
countermeasure.
The total of the current through the
resistor and the load current must exceed
the min. rated load current.
In case the dummy resistor is not used,
keep in mind that the residual voltage
becomes as follows:
Example:
For the inductive load by the 20 mA load
current and the 200 V AC load voltage,
the load impedance becomes 10 k Ω and
Ve/V = 14% is estimated from the right
above graph. Accordingly, the 28 V
voltage remains across the both ends of
the load when the solid state relay is
turned off.
For Cautions for Use.
SSR
1
2
Load
R
0
Dummy resistor
Load
power
source
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
• Characteristics of residual voltage vs.
load impedance
2. when the terminal is bent
Care shall be taken neither to apply
mechanical stresses to the mold area of
the solid state relay nor to bend the
terminal 45 degrees or more.
Ve
V
(%)
×
100
100
80
60
40
20
Solid
state relay
0
Ve: Residual voltage
V: Power voltage
f = 60Hz
SSR
1
2
10
Load
Ve
20
Max.
45°
V
Solder
Printed board
30
Power factor: 1
(resistor load)
Power factor: 0.4
(induction load)
40
50