LCA110L Clare, LCA110L Datasheet - Page 6

• Manufacturer Part Number: LCA110L
• Description: RELAY OPTOMOS 120MA SP-NO 6-DIP
• Manufacturer: Clare
• Series: LCA, OptoMOS®r

Specifications of LCA110L

• Circuit: SPST-NO (1 Form A)
• Output Type: AC, DC
• On-state Resistance: 35 Ohm
• Load Current: 120mA
• Voltage - Input: 1.2VDC
• Voltage - Load: 0 ~ 350 V
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Package / Case: 6-DIP (0.300", 7.62mm)
• Input Type: DC
• Input Voltage (max): 1.4V
• Output Voltage (max): 350V
• Input Current (max): 50mA
• Output Current: 120mA
• Isolation Voltage: 3.75kV
• Circuit Arrangement: 1 Form A
• Package Type: PDIP
• Output Device: MOSFET
• Pin Count: 6
• Mounting: Through Hole
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Rad Hardened: No
• Load Voltage Rating: 350 V
• Load Current Rating: 120 mA
• Mounting Style: Through Hole
• Relay Type: Single Pole
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and
product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale,
Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for
a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications
intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare,
Inc. reserves the right to discontinue or make changes to its products at any time without notice.
6
Tape and Reel Packaging for 6-Pin “S” Suffix Parts
Embossed
Carrier
(13.00 Dia)
330.2 Dia
Tape Thickness
(0.004 Max)
0.102 Max
Top Cover
Embossment
MECHANICAL DIMENSIONS (Cont.)
K
K
Top Cover
0
1
= 4.90
= 3.80
Tape
(0.19)
(0.15)
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
User Direction of Feed
P = 12.00
(0.472)
Specification: DS-LCA110L-R02
©Copyright 2008, Clare, Inc.
OptoMOS
All rights reserved. Printed in USA.
11/18/08
A
0
(0.400)
= 10.10
®
is a registered trademark of Clare, Inc.
B
0
(0.400)
= 10.10
W = 16.00 MAX
LCA110L
(0.63 MAX)
Dimensions
(inches)
mm