H3CR-H8L AC100-120 S Omron, H3CR-H8L AC100-120 S Datasheet - Page 22
![RELAY TIMER 0-12SEC OFF-DELAY](/photos/9/60/96097/h3cr-h8l-ac100-120s_sml.jpg)
H3CR-H8L AC100-120 S
Manufacturer Part Number
H3CR-H8L AC100-120 S
Description
RELAY TIMER 0-12SEC OFF-DELAY
Manufacturer
Omron
Series
H3CR-Hr
Specifications of H3CR-H8L AC100-120 S
Mounting Type
Socket
Relay Type
Integrated
Function
Off-Delay
Circuit
DPDT (2 Form C)
Delay Time
0.05 Sec ~ 12 Sec
Output Type
Mechanical Relay
Contact Rating @ Voltage
5A @ 250VAC
Voltage - Supply
100 ~ 120VAC
Termination Style
8 Pin Socketable
Timing Adjustment Method
Hand Dial
Timing Initiate Method
Input Voltage
Timing Range
12 s to 12 min
Supply Voltage
100 V to 120 V
Time Range
0.05 Sec. To 12 Sec.
Supply Voltage Ac, Min
100VAC
No. Of Timing Functions
2
Body Material
52F4142
No. Of Pins
8
Supply Voltage Ac, Max
240VAC
Load Current Rms Max
5A
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
H3CR-H8L-AC100-120S
H3CRH8LAC100120S
Z2387
H3CRH8LAC100120S
Z2387
• H3CR-G Star-delta Timers
A star operation time range (0 to 6, 0 to 12, 0 to 60, or 0 to 120
seconds) is selected with the star operation time range selector at
the lower left corner of the front panel.
The time required for switching (0.05, 0.1, 0.25, or 0.5 second) from
the star operation to the delta operation of the H3CR-G can be
selected with the star-delta transfer time selector at the lower right
corner of the front panel.
■ Using the Time Setting Ring for H3CR-A/-G
Setting a Specific Time
Mount the Panel Cover on the Timer, set the desired time with the
time setting knob, and place Time Setting Ring A onto the time
setting knob so that the time setting notch of Time Setting Ring A is
in the center of the reset lock position of the Panel Cover.
Time Setting Ring A Panel cover
Time setting
notch
Star operation time
range selector
Reset lock position
Time setting notch
Example: To set the time to 10 s.
Star-delta transfer
time selector
Setting position
• H3CR-H Power OFF-delay Timers
A time range (0 to 0.6, 0 to 1.2, 0 to 6, and 0 to 12) is selected with
the time range selector at the lower left corner of the front panel. No
time unit selector is available. When ordering the H3CR-H, specify S
(for the second unit) or M (for the minute unit) for your H3CR-H.
Setting of Time
Use the time setting knob to set the desired time.
Limiting the Setting Range
Example: To set a range of 10 and 20 s.
Mount the Panel Cover on the Timer, set the time setting knob to 10 s
(the lower limit of the setting range), and place Time Setting Ring C
onto the time setting knob so that the stopper of Time Setting Ring C
is on the right edge of the reset lock position of the Panel cover. Next,
set the time setting knob to 20 s (the upper limit of the setting range),
place Time Setting Ring B onto the time setting knob so that the
stopper of Time Setting Ring B is on the left edge of the reset lock
position of the Panel Cover.
Time Setting
Ring B
Stopper
Time Setting
Ring C
Time range
selector
Reset lock position
Panel cover
Range
H3CR
2