1-1423169-0 Tyco Electronics, 1-1423169-0 Datasheet - Page 4

• Manufacturer Part Number: 1-1423169-0
• Description: RELAY TIME DELAY 2PDT 125VDC
• Manufacturer: Tyco Electronics
• Series: E7000, AGASTATr

Specifications of 1-1423169-0

• Relay Type: Integrated
• Function: On-Delay
• Circuit: DPDT (2 Form C)
• Delay Time: 5 Sec ~ 50 Sec
• Output Type: Mechanical Relay
• Contact Rating @ Voltage: 10A @ 240VAC
• Voltage - Supply: 125VDC
• Mounting Type: Panel Mount
• Termination Style: Screw Terminal
• Timing Adjustment Method: Hand Dial
• Timing Initiate Method: Input Voltage
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: E7012PD004

Specifications subject to change
Dimensions are for reference only.
Nuclear Qualified Time Delay Relays
Contact ratings as listed under the UL
Component Recognition Program for 100,000
operations:
10 Amps., resistive, 240 VAC
1/4 horsepower, 120 VAC/240 VAC
15 Amps., 30VDC
5 Amps., General Purpose, 600 VAC
COIL DATA
All units draw approximately 8 watts power at
rated voltage.
85 to 110 percent of nominal rated value.
rated voltage.
110 percent of nominal rated value.
rated voltage.
cycles (50% on/off, maximum 30 minutes on) at
voltages 10% above the listed maximums.
operations or 10 years from the date of
The operating voltage range for AC relays is
AC units drop-out at approximately 50% of
The operating range of DC relays is 80 to
DC units drop-out at approximately 10% of
All units may be operated on intermittent duty
The qualified life of this unit is 25,000
manufacture, whichever occurs first.
REPLACEMENT SCHEDULE
}
Pole
Per
Environmental Conditions (Qualified Life)
PARAMETER
Temperature (°F)
Humidity (R.H. %)
Pressure
Radiation (rads)
Operating Conditions (Normal Environment)
NORMAL OPERATING SPECIFICATIONS
Coil Operating Voltage, Nominal (Rated)
Relay Operate Time
Relay Release (Recycle) Time
Contact Ratings, Continuous
Insulation Resistance (In megohms at 500 vdc)
Dielectric (vrms, 60 Hz)
Repeat Accuracy
Operating Conditions (Abnormal Environment)
ADVERSE OPERATING
SPECIFICATIONS
TEMPERATURE (°F)
Humidity (R.H. %)
Coil Operating Voltage
* (% of Rated)
Model E7012 (AC)
Model E7022 (AC)
*All coils may be operated on intermittent duty cycles at voltages 10% above listed maximums (Intermittent Duty = Maximum
50% duty cycle and 30 minutes “ON” time.)
OPERATING CHARACTERISTICS
Pull-in (% of rated value)
Drop-out (% of rated value)
Power (Watts at rated value)
Model E7012
Model E7022
Model E7012
Model E7022
(Resistive at 125 vdc)
(Resistive at 120 vac, 60 Hz)
Between Terminals and Ground
Between Non-connected Terminals
APPROXIMATE WEIGHT
Model E7012 and E7022 with AC Coils - 2.13 lbs.
Model E7012 and E7022 with DC Coils - 2.25 lbs.
Model E7014 and E7024 with AC Coils - 2.43 lbs.
Model E7014 and E7024 with DC Coils - 2.57 lbs.
(Weight may vary slightly with particular coil voltage.)
TERMINALS
Standard screw terminals (#8 — 32 truss head
screws supplied) are located on the front of the
unit, with permanent schematic markings.
Barrier isolation is designed to accommodate
spade or ring-tongue terminals with spacing to
meet industrial control specifications.
NOTE
Tyco Electronics Corporation cannot recom-
mend the use of its products in the containment
areas of Nuclear Power Generating Stations.
(DC)
(DC)
4
NORMAL
70-104
85-110
80-110
85-110
80-110
40-60
MIN.
40
10
–
–
WITH DC COILS
10% Approx.
50 ms Max.
50 ms Max.
80% Min.
8 Approx.
10.0 amp
500 Min.
DBE “A”
As Spec
1.0 amp
85-110
80-110
85-110
80-110
±10%
10-95
1,500
1,000
N/A
N/A
40
Atmospheric
first four (4) digits of the serial number on the
nameplate:
First two digits indicate the
year.
Second two digits indicate the
week.
Example: Date code 8014: 80 indicates 1980;
14 indicates the week of April 2 through 8.
NORMAL
70-104
MODEL
COIL
TIME 1.5 TO 15 SEC.
40-60
The date of manufacture can be found in the
–
DBE “B”
85-110
80-110
85-110
80-110
10-95
120
Technical Support Center 1-800-522-6752
E7012PC003
125VDC
L1
WITH AC COILS
50% Approx.
50 ms Max
50 ms Max
85% Min.
8 Approx.
10.0 amp
500 Min.
DBE “C”
As Spec
1.0 amp
85-110
90-110
85-110
80-110
2.0 X 10
1,500
1,000
±10%
10-95
N/A
N/A
145
www.tycoelectronics.com
MAX.
156
95
5
–
SERIAL 8014 –
L2
(Gamma)
XX
Electronics
DBE “D”
85-110
90-110
85-110
80-110
10-95
156
XX