BZ01CA223ZSB AVX Corporation, BZ01CA223ZSB Datasheet - Page 18

• Manufacturer Part Number: BZ01CA223ZSB
• Description: CAP 22MF 12V CARBON SMD
• Manufacturer: AVX Corporation
• Series: BestCap® BZr

Specifications of BZ01CA223ZSB

• Capacitance: 22mF
• Tolerance: -20%, +80%
• Voltage - Rated: 12V
• Esr (equivalent Series Resistance): 350.0 mOhm
• Lifetime @ Temp.: 1000 Hrs @ 70°C
• Mounting Type: Surface Mount
• Package / Case: 3 Lead BZ01
• Height: 0.299" (7.60mm)
• Size / Dimension: 1.102" L x 0.669" W (28.00mm x 17.00mm)
• Operating Temperature: -20°C ~ 70°C
• Voltage Rating: 12 Volts
• Esr: 350 mOhms
• Operating Temperature Range: - 20 C to + 70 C
• Dimensions: 17 mm W x 28 mm L x 2.1 mm H
• Leakage Current: 5 uAmps
• Product: Super Capacitors
• Material, Element: Electric Double Layer
• Special Features: Supercapacitors and Ultracapacitors
• Termination: SMT
• Voltage, Rating: 12 VDC
• Capacitance Range: 6.8 mF to 1000 mF
• Temperature Range: –20°C to 70°C
• Capacitance Tolerance: +80, -20%
• Capacitor Mounting: SMD
• Termination Type: Solder
• No. Of Pins: 3
• Rohs Compliant: Yes
• Filter Terminals: Solder
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Spacing: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 478-3523

BestCap
High Power Pulse Supercapacitors
SECTION 3.3: MOUNTING PROCEDURE ON A PCB FOR BESTCAP
BestCap
selectively heating only the capacitor terminals by using a
pulsed reflow soldering station or by using hand soldering.
IR Reflow or wave soldering may not be used. The main
body of the device should be less than 60ºC at all times.
PULSED REFLOW SOLDERING
Application data for the ‘Unitek’ pulsed-reflow soldering
station.
Equipment:
Controller
Head
Solder paste type
Solder composition
Percent solids
Solder thickness
Solder-weld tip size
Solder-weld tip force
Temperature profile:
Pre-heat
Rise
Reflow
Cool
®
products can be mounted on PCBs by either
In both cases, the main body of the BestCap
Temperature
440ºC (±10)
440ºC (±10)
®
Uniflow ‘Pulsed Thermode Control’
Thin-line Reflow Solder Head
No Clean Flux
63% Sn, 37% Pb
88%
6 mils
0.075"
6 lbs.
130ºC
165ºC
Ultra-low ESR
0 sec.
2 sec.
2 sec.
Time
®
part should be less than 60ºC at all times.
HAND SOLDERING STATION
Equipment:
Solder type:
Temperature:
Time:
Solder Type:
Temperature:
Time:
Temperature controlled, 50W general
purpose iron
63Sn/37Pb, rosin core wire
400ºC (+20ºC - 100ºC)
2 to 5 seconds maximum, smaller time
(2 sec.) at 420ºC and 5 sec. at 300ºC,
overall it being a time-temperature rela-
tionship. Shorter time, higher temperature
is preferred.
Lead Free, 95Sn/5Ag
430ºC (+20ºC - 100ºC)
2 to 5 seconds maximum, smaller time
(2 sec.) at 450ºC and 5 sec. at 330ºC,
overall it being a time-temperature rela-
tionship. Shorter time, higher temperature
is preferred.
®
17